সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
60-Mesh and 80-Mesh Sieves: U.S. Standard Sieves No. 60 and No. 80 (Bureau of Standards, 1924)
Tex

তৈরি করেছেন

Tex

7. নভেম্বর 2026FO
৯
০
০
০
০

60-Mesh and 80-Mesh Sieves: U.S. Standard Sieves No. 60 and No. 80 (Bureau of Standards, 1924)

Two standard testing sieves made the same way; only the wire and the opening change with the sieve number. Plain-woven brass or bronze wire cloth is soldered smoothly into a round frame about 20 cm (8 in) across. No. 60 has 0.250 mm openings (the 60-mesh sieve); No. 80 has 0.177 mm openings (the 80-mesh sieve). The finer the cloth, the finer the grains that pass. Source: Bureau of Standards, Letter Circular 74, Standard Specifications for Sieves (revised 1924). Unknown: the frame metal and the weaving. Picture: the Bureau's table.
মধ্যবর্তী
Unknown

নির্দেশাবলি

1

Choose the sieve number

The sieve number sets the wire and the opening (Bureau of Standards table, 1924): No. 60: opening 0.250 mm (0.0098 in), wire 0.162 mm (0.0064 in). No. 80: opening 0.177 mm (0.0070 in), wire 0.119 mm (0.0047 in). The opening is the clear space between adjacent wires. No. 60 passes grains under 0.250 mm; No. 80 passes grains under 0.177 mm.
2

Weave the wire cloth

Weave plain (not twilled) cloth from brass, bronze or other suitable wire of the diameter for your sieve number, spacing the wires so the opening is as in the table each way. Ours: bronze wire. Not given: how it is woven.

এই ধাপের উপকরণ:

ব্রোঞ্জের তারব্রোঞ্জের তার1 warp and shoot wires

প্রয়োজনীয় সরঞ্জাম:

তারের জাল বোনার তাঁততারের জাল বোনার তাঁত
3

Make the frame

Make a circular frame about 20 cm (8 in) across, with about 5 cm (2 in), or 2.5 cm (1 in), between its top and the cloth. Ours: brass strip. Not given: the frame metal.

এই ধাপের উপকরণ:

পিতলের ফালিপিতলের ফালি1 frame

প্রয়োজনীয় সরঞ্জাম:

পাত কাটার কাঁচিপাত কাটার কাঁচি
ঝালাইয়ের ছড়ঝালাইয়ের ছড়
4

Mount the cloth

Mount the cloth on the frame without distorting it. Fill the joint between cloth and frame smoothly with solder, so the material being sieved cannot catch in it.

এই ধাপের উপকরণ:

টিন-সিসার ঝালাইটিন-সিসার ঝালাই1 joint
ফ্লাক্সফ্লাক্স1 joint

প্রয়োজনীয় সরঞ্জাম:

ঝালাইয়ের ছড়ঝালাইয়ের ছড়
5

Check it against the tolerances

Measure the warp and shoot wires separately. For both numbers the average opening must be within ±6 % of the table, the average wire diameter within −15 to +35 %, and no opening may exceed the table opening by more than 40 %. Reject a sieve with punctures, loose or wavy cloth, poor soldering, or too many large openings.

প্রয়োজনীয় সরঞ্জাম:

মাইক্রোমিটারমাইক্রোমিটার
আতশ কাচআতশ কাচ

উপকরণ

4

প্রয়োজনীয় সরঞ্জাম

5

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...