সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Air Compressor: Twin Pump-Cylinder, Water-Cooled (Shop Notes, 1912)
Emma

তৈরি করেছেন

Emma

4. নভেম্বর 2026SE
৯
০
০
০
০

Air Compressor: Twin Pump-Cylinder, Water-Cooled (Shop Notes, 1912)

A simple compressor that fills a tank to about 50 lb: two bought cast-iron well-pump cylinders, 2 1/2 in bore, driven alternately by a rocking arm from a crank, with check valves in and out and a water jacket pipe to cool them. Source: Popular Mechanics Shop Notes for 1912, pp. 1708-1709. Unknown: tank, pipe sizes. Picture: Figs. 1-2 of the book.
মধ্যবর্তী
Unknown

নির্দেশাবলি

1

Pipe the two cylinders

Take two ordinary cast-iron open-well pump cylinders, 2 1/2 in bore, bought complete with guide rods and plungers. Join their open ends with tees to a cross pipe C, and fit a packing box from an old valve (A, B) into each tee so the plunger rods D and E pass through (Fig. 1).

এই ধাপের উপকরণ:

অজানা ধাতুঅজানা ধাতু2 pump cylinders with plungers
ইস্পাতের পাইপ (পুরু দেয়াল, প্যাঁচকাটা প্রান্ত)ইস্পাতের পাইপ (পুরু দেয়াল, প্যাঁচকাটা প্রান্ত)1 pipe C
প্যাঁচকাটা পাইপ ফিটিংপ্যাঁচকাটা পাইপ ফিটিং2 tees
অজানা প্যাকিংঅজানা প্যাকিং2 packing boxes

প্রয়োজনীয় সরঞ্জাম:

পাইপ রেঞ্চপাইপ রেঞ্চ
2

Fit the valves

On the outer end of each cylinder fit an inlet check valve (H, I) and an outlet valve (J, K), the outlets joined to pipe L running to the tank.

এই ধাপের উপকরণ:

একমুখী ভালভএকমুখী ভালভ4 H, I, J, K
ইস্পাতের পাইপ (পুরু দেয়াল, প্যাঁচকাটা প্রান্ত)ইস্পাতের পাইপ (পুরু দেয়াল, প্যাঁচকাটা প্রান্ত)1 pipe L
প্যাঁচকাটা পাইপ ফিটিংপ্যাঁচকাটা পাইপ ফিটিং1 টুকরা
অজানা উপাদানঅজানা উপাদান1 air tank

প্রয়োজনীয় সরঞ্জাম:

পাইপ রেঞ্চপাইপ রেঞ্চ
3

Water-cool it

Run cooling water through pipe C, set by valve M in and valve N out, so there is no pressure on the water to push it into the air chambers O and P.

এই ধাপের উপকরণ:

গ্লোব ভালভগ্লোব ভালভ2 M and N

প্রয়োজনীয় সরঞ্জাম:

জলজল
পাইপ রেঞ্চপাইপ রেঞ্চ
4

Fit the crank drive

Drive it from a shaft (Fig. 2): crank S works an arm pivoted at its centre T, and the plunger rods D and E attach to the arm's ends U and V.

এই ধাপের উপকরণ:

অজানা ধাতুঅজানা ধাতু1 crank, arm
ষড়ভুজ মাথার বোল্ট - শ্রেণি 8.8ষড়ভুজ মাথার বোল্ট - শ্রেণি 8.81 pivot and rod pins, number not given

প্রয়োজনীয় সরঞ্জাম:

হাত-ড্রিলহাত-ড্রিল
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ

উপকরণ

8

প্রয়োজনীয় সরঞ্জাম

4

এই ব্লুপ্রিন্ট যা তৈরি করে

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...