কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Aviation Gasoline by Catalytic Cracking over Silica-Alumina Gel at 750 °F (Voorhies, US 2,230,552)
Charlie

তৈরি করেছেন

Charlie

29. অক্টোবর 2026DE
০
০
০
০
০

Aviation Gasoline by Catalytic Cracking over Silica-Alumina Gel at 750 °F (Voorhies, US 2,230,552)

Oil vapour passed over a hot silica-alumina gel cracks into gasoline of relatively high octane number. Voorhies (Standard Oil Development, 1941) showed that a light feed cracked at a low temperature, about 750 °F, gives aviation gasoline that needs little or no further refining. Best result in the patent (Ex. 1, a light crude cut boiling 336-540 °F): 25.9 % of the feed as aviation gasoline (the table says 25.0 %), ASTM octane 81.0 clear and 91.7 with 3 cc of tetraethyl lead per gallon. Variables: the feed, the temperature and the feed rate. Hotter and faster gives less gasoline and more unsaturates. Source: A. Voorhies Jr., US 2,230,552 (1941). Not given: reactor design, how the catalyst is regenerated, catalyst amounts. Highly flammable vapours. Picture: catalytic cracking units in Louisiana, about 1944 (FSA, public domain).
বিশেষজ্ঞ
1 day

নির্দেশাবলি

1

Fill the reactor with silica-alumina gel

Pack the reaction zone with a synthetic gel of silica and alumina. Voorhies's gel was silica hydrogel soaked in aluminium nitrate solution, dried, and heated to break down the nitrate and activate it, with a silica to alumina molar ratio of about 12 to 1.

প্রয়োজনীয় সরঞ্জাম:

স্থির শয্যা নলাকার রিঅ্যাক্টরস্থির শয্যা নলাকার রিঅ্যাক্টর
সিলিকা-অ্যালুমিনা জেল অনুঘটকসিলিকা-অ্যালুমিনা জেল অনুঘটক
2

Choose a light feed

The feed should have a mid-boiling point below 600 °F and an aniline point below 155 °F, better below 150 °F; the heavier the feed, the lower its aniline point must be. Kerosene of aniline point 145 °F (Ex. 6) qualifies. A gas oil of aniline point 173 °F (Ex. 5) gave a gasoline of acid heat 34 °F, against 12.5 °F in Ex. 1.

এই ধাপের উপকরণ:

কেরোসিনকেরোসিন0.6 volume per volume of catalyst per hour

প্রয়োজনীয় সরঞ্জাম:

তেলের ট্যাংকতেলের ট্যাংক
3

Crack at 750 °F in half-hour runs

Hold the reaction zone at 750 °F (range 700-800 °F). Pass 0.6 volume of liquid feed per volume of catalyst per hour, in half-hour cracking periods with a regeneration of the catalyst between them. Voorhies does not say how he regenerated it.

প্রয়োজনীয় সরঞ্জাম:

স্থির শয্যা নলাকার রিঅ্যাক্টরস্থির শয্যা নলাকার রিঅ্যাক্টর
সিলিকা-অ্যালুমিনা জেল অনুঘটকসিলিকা-অ্যালুমিনা জেল অনুঘটক
থার্মোমিটারথার্মোমিটার
4

Fractionate the cracked product

Condense and fractionate the cracked products. Take aviation gasoline up to an end point of about 290 to 310 °F. In Ex. 2 the rest split into 8.7 % gas, 37.5 % heavy naphtha boiling 300-400 °F (octane 75.8 clear, usable as a blending agent or solvent) and 25 % gas oil.

প্রয়োজনীয় সরঞ্জাম:

আংশিক চোলাইয়ের যন্ত্রআংশিক চোলাইয়ের যন্ত্র
কনডেনসারের কুণ্ডলীকনডেনসারের কুণ্ডলী
জলজল
তেলের ট্যাংকতেলের ট্যাংক
5

Variables: feed, temperature, rate

Ex. 1 (336-540 °F crude cut, 750 °F, 0.6): 25.9 %, octane 81.0 clear. Ex. 2 (244-507 °F cut, 725 °F, 0.3): 30.8 %, 79.2 clear, 89.5 with 3 cc lead. Ex. 6 (kerosene, 750 °F, 0.6): 20.1 %, acid heat 16 °F. Ex. 7 (gas oil, 850 °F, 1.2): 20.6 %, acid heat 70 °F against 20+ °F at 750 °F (Ex. 4).

প্রয়োজনীয় সরঞ্জাম:

স্থির শয্যা নলাকার রিঅ্যাক্টরস্থির শয্যা নলাকার রিঅ্যাক্টর

উপকরণ

1
  • 0.6 volume per volume of catalyst per hour
    প্লেসহোল্ডার

প্রয়োজনীয় সরঞ্জাম

7

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...