কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Barium-Calcium Ferrite Disc Magnet: 20 % Calcium, 5 Minutes at 1290 °C (Went, Philips 1956, Ex. 20)
Charlie

তৈরি করেছেন

Charlie

28. অক্টোবর 2026DE
০
০
০
০
০

Barium-Calcium Ferrite Disc Magnet: 20 % Calcium, 5 Minutes at 1290 °C (Went, Philips 1956, Ex. 20)

A ceramic magnet with a fifth of the barium replaced by calcium: 0.08 mol barium carbonate, 0.02 mol calcium carbonate and 0.6 mol iron oxide, made as in Example 18 but sintered at 1290 °C for only 5 minutes. Went's rod held 1,615 gauss with a coercive force of 1,550 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 20. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
উন্নত
2 days

নির্দেশাবলি

1

Weigh barium carbonate, chalk and iron oxide

Weigh 15.79 g barium carbonate (0.08 mol), 2.002 g calcium carbonate (0.02 mol) and 95.55 g ferric oxide (0.6 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

এই ধাপের উপকরণ:

বেরিয়াম কার্বনেট (উইদারাইট)বেরিয়াম কার্বনেট (উইদারাইট)15.79 গ্রা
ক্যালসিয়াম কার্বনেট (সাদা খড়ি)ক্যালসিয়াম কার্বনেট (সাদা খড়ি)2.002 গ্রা
ফেরিক অক্সাইডফেরিক অক্সাইড95.55 গ্রা

প্রয়োজনীয় সরঞ্জাম:

সমবাহু দাঁড়িপাল্লাসমবাহু দাঁড়িপাল্লা
রাবারের দস্তানারাবারের দস্তানা
P100 শ্বাসরক্ষকP100 শ্বাসরক্ষক
2

Mill, presinter and mill as in Example 18

As in Example 18: grind with alcohol 4 hours, dry at 150 °C, fire in air at 1000 °C for 2 hours, grind again 4 hours and dry.

প্রয়োজনীয় সরঞ্জাম:

লোহার বল মিললোহার বল মিল
ইথানল - গবেষণাগার শ্রেণি, 95 %ইথানল - গবেষণাগার শ্রেণি, 95 %
শুকানোর চুল্লিশুকানোর চুল্লি
মাফল চুল্লিমাফল চুল্লি
ঢাকনাসহ মুচি (চিনামাটির)ঢাকনাসহ মুচি (চিনামাটির)
মুচি-চিমটামুচি-চিমটা
3

Press at 1.5 t/cm²

Press at 1.5 tonnes per cm², as in Example 18 (ours: discs instead of rods).

প্রয়োজনীয় সরঞ্জাম:

হাইড্রলিক প্রেসহাইড্রলিক প্রেস
ডিস্ক চাপার ডাইডিস্ক চাপার ডাই
4

Pass through a 1290 °C zone in 5 minutes

Sinter in air at 1290 °C by passing the pieces through a 10 cm hot zone at 20 mm per minute: 5 minutes in the heat.

প্রয়োজনীয় সরঞ্জাম:

টিউব ফার্নেসটিউব ফার্নেস
তাপরোধী দস্তানাতাপরোধী দস্তানা
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

প্রয়োজনীয় সরঞ্জাম:

তড়িৎ-চুম্বকতড়িৎ-চুম্বক
দিকনির্ণয় যন্ত্রদিকনির্ণয় যন্ত্র

উপকরণ

3

প্রয়োজনীয় সরঞ্জাম

15

এই ব্লুপ্রিন্ট যা তৈরি করে

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...