কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Barium Ferrite Disc Magnet: 0.4 mol BaCO3 to 3.2 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 5)
Charlie

তৈরি করেছেন

Charlie

28. অক্টোবর 2026DE
০
০
০
০
০

Barium Ferrite Disc Magnet: 0.4 mol BaCO3 to 3.2 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 5)

A barium ferrite with 0.4 mol barium carbonate to 3.2 mol iron oxide, made as in Example 4 and passed through a 1330 °C furnace in 20 minutes. Went's rod held 1,220 gauss with a coercive force of 1,900 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 5. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
উন্নত
2 days

নির্দেশাবলি

1

Weigh barium carbonate and iron oxide

Weigh 79.4 g barium carbonate (0.4 mol) and 516.4 g ferric oxide (3.2 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

এই ধাপের উপকরণ:

বেরিয়াম কার্বনেট (উইদারাইট)বেরিয়াম কার্বনেট (উইদারাইট)79.4 গ্রা
ফেরিক অক্সাইডফেরিক অক্সাইড516.4 গ্রা

প্রয়োজনীয় সরঞ্জাম:

সমবাহু দাঁড়িপাল্লাসমবাহু দাঁড়িপাল্লা
রাবারের দস্তানারাবারের দস্তানা
P100 শ্বাসরক্ষকP100 শ্বাসরক্ষক
2

Mill with alcohol 15.5 hours, dry and sieve

As in Example 4: grind the mixture with alcohol in a ball mill for 15.5 hours, then dry it and sieve it.

প্রয়োজনীয় সরঞ্জাম:

লোহার বল মিললোহার বল মিল
ইথানল - গবেষণাগার শ্রেণি, 95 %ইথানল - গবেষণাগার শ্রেণি, 95 %
শুকানোর চুল্লিশুকানোর চুল্লি
চালনিচালনি
3

Knead with a binder and form

Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.

প্রয়োজনীয় সরঞ্জাম:

পলিভিনাইল অ্যালকোহল গুঁড়াপলিভিনাইল অ্যালকোহল গুঁড়া
হাইড্রলিক প্রেসহাইড্রলিক প্রেস
ডিস্ক চাপার ডাইডিস্ক চাপার ডাই
শুকানোর চুল্লিশুকানোর চুল্লি
4

Pass through a 1330 °C zone in 20 minutes

Sinter in air at 1330 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.

প্রয়োজনীয় সরঞ্জাম:

টিউব ফার্নেসটিউব ফার্নেস
তাপরোধী দস্তানাতাপরোধী দস্তানা
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

প্রয়োজনীয় সরঞ্জাম:

তড়িৎ-চুম্বকতড়িৎ-চুম্বক
দিকনির্ণয় যন্ত্রদিকনির্ণয় যন্ত্র

উপকরণ

2

প্রয়োজনীয় সরঞ্জাম

14

এই ব্লুপ্রিন্ট যা তৈরি করে

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...