সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Knock-Down Footstool: Bolted Metal Legs and Rails Under a Screwed-On Wooden Top (Bolens, 1900)
Harry W. Bolens of Port Washington, Wisconsin, received US 640,265, dated 2 January 1900, for a footstool whose base comes apart: four metal corner legs and four rails bolted together, with a wooden top screwed on through lugs on the legs. It packs flat for storage and shipping.
His legs were ornamental castings; ours are bent from steel angle. All sizes are ours.
শিক্ষানবিশ
About 4 hours
নির্দেশাবলি
1
1
Cut list
Cut list
Jupyter নোটবুক লোড হচ্ছে…
2
2
Read US 640,265
Read US 640,265
"The above-described base has the advantage of being a knockdown structure, and thus I provide for economical storage and transportation."
3
3
Make the legs
Make the legs
Cut four legs of steel angle to the notebook's length, his corner legs A. At the top of each, cut and bend a small tab inward to make the flange and lug (his b and c), and drill the lug for a top screw. File off sharp edges.
এই ধাপের উপকরণ:
নরম ইস্পাতের কোণ-লোহা1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
হ্যাকস
বেঞ্চ ভাইস
গোল মাথার হাতুড়ি
স্তম্ভযুক্ত তুরপুন যন্ত্র
ড্রিল-বিট সেট
উকো-সেট4
4
Make the rails
Make the rails
Cut two side rails and two end rails of flat bar, his rails B. Bend each end slightly (his offset ends) so it lies flush inside the leg's angle. Drill matching holes through rail ends and legs.
এই ধাপের উপকরণ:
নরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
হ্যাকস
বেঞ্চ ভাইস
স্তম্ভযুক্ত তুরপুন যন্ত্র
ড্রিল-বিট সেট5
5
Bolt the base
Bolt the base
Bolt each rail end to its leg with a bolt and nut, his bolts f and nuts g. Check the base stands square and level.
এই ধাপের উপকরণ:
ষড়ভুজ বোল্টের সংগ্রহ1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
সমন্বয়যোগ্য রেঞ্চ6
6
Fit the top
Fit the top
Cut and sand a hardwood top, his top C. Set it on the base and drive a screw up through each leg's lug into it, his screws h. Upholster it if you like, as he allows.
এই ধাপের উপকরণ:
শক্ত কাঠের তক্তা1 টুকরা
কাঠের স্ক্রু1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
হাত-করাত
শিরিষ কাগজ
স্ক্রুড্রাইভার সেট7
7
Troubleshooting
Troubleshooting
Footstool troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
**Harry W. Bolens** of Port Washington, Wisconsin, US 640,265, dated 2 January 1900, filed 4 October 1899. He claimed "a footstool-base consisting of legs provided at their upper ends with inwardly-extending flanges as well as horizontal lugs ... apertured for the engagement of top securing devices" and rails between the flanges. His legs and rails were castings, though he does not limit the material; the steel angle and flat bar, the bent lugs, the hardwood top and all sizes are ours.
উপকরণ
5- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
প্রয়োজনীয় সরঞ্জাম
10- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।


