সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Closet Shoe Rack: Wedge-Shaped Pockets on the Wall With a Slatted Bottom for Dirt to Fall Through (Boy Mechanic, 1913)
Woody

তৈরি করেছেন

Woody

13. নভেম্বর 2026NO
৬
০
০
০
০

Closet Shoe Rack: Wedge-Shaped Pockets on the Wall With a Slatted Bottom for Dirt to Fall Through (Boy Mechanic, 1913)

A shoe rack "that can be placed on the wall in the clothes closet", from The Boy Mechanic (1913): two boards 9 in wide and about 3 ft long, held apart by six wedge-shaped partitions so the pockets open wider at the top, and a slatted bottom that lets the dirt fall through. Sizes are the book's. Contributed to Popular Mechanics by Guy H. Harvey of Mill Valley, California.
শিক্ষানবিশ
About 2 hours

নির্দেশাবলি

1

The partitions

Jupyter নোটবুক লোড হচ্ছে…
2

Read The Boy Mechanic

"Two boards, 9 in. wide and about 3 ft. long, with six partitions between, as shown, will make pockets about 6 in. long. The width of the pockets at the bottom is 2 in. and at the top 5 in."
3

Cut the boards and partitions

Cut two pine boards 9 in wide and about 3 ft long, the back and the front. Cut six partitions as wedges from the notebook, 9 in tall, 2 in deep at the bottom and 5 in at the top.

এই ধাপের উপকরণ:

পাইন কাঠের তক্তাপাইন কাঠের তক্তা1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

ফিতা-মাপফিতা-মাপ
পেনসিলপেনসিল
স্থির গুনিয়াস্থির গুনিয়া
হাত-করাতহাত-করাত
4

Assemble the pockets

Nail the partitions to the back board, square to it, one at each end and the rest spaced about 6 in apart. Nail the front board to their sloping edges, so it leans out and the pockets open wider at the top.

এই ধাপের উপকরণ:

পেরেকপেরেক1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

নখওয়ালা হাতুড়িনখওয়ালা হাতুড়ি
5

Fit the slatted bottom

Nail strips across the bottom of the pockets with gaps between them, as his Fig. 1, so the dirt from the shoes falls through.

এই ধাপের উপকরণ:

শক্ত কাঠের ফালিশক্ত কাঠের ফালি1 টুকরা
পেরেকপেরেক1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাত-করাতহাত-করাত
নখওয়ালা হাতুড়িনখওয়ালা হাতুড়ি
6

Hang it

Screw the back board to the wall of the clothes closet (ours), and put a pair of shoes toe-down in each pocket.

এই ধাপের উপকরণ:

কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাত-ড্রিলহাত-ড্রিল
স্ক্রুড্রাইভার সেটস্ক্রুড্রাইভার সেট
7

Troubleshooting

Shoe rack troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Volume 1**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913 (Project Gutenberg #12655), "Homemade Shoe Rack", contributed by Guy H. Harvey of Mill Valley, California. The board sizes, pocket sizes and six partitions are the book's; the wood, nails, slat sizes and hanging screws are ours.

উপকরণ

4

প্রয়োজনীয় সরঞ্জাম

7
  • 1 vendor sell this, none ship to you yet
    প্লেসহোল্ডার
  • 1 vendor sell this, none ship to you yet
    প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার

এই ব্লুপ্রিন্ট যা তৈরি করে

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...