সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Ski Sled: Two 10 ft Ash Ski Runners With a Rocker, Under a Three-Board Top (Boy Mechanic, 1919)
George J. Egelberg's ski sled from The Boy Mechanic, Book 3 (1919): "built low and wide so that it will not tip easily", on two 10 ft by 6 in ash runners boiled and bent like skis, set on knee blocks with a slight rocker, and topped with three 6 in boards.
মধ্যবর্তী
About 2 days
নির্দেশাবলি
1
1
His sizes, and the rocker
His sizes, and the rocker
Jupyter নোটবুক লোড হচ্ছে…
2
2
Read The Boy Mechanic, Book 3
Read The Boy Mechanic, Book 3
"The skis, or runners, are cut 10 ft. long and 6 in. wide, from 1-in. ash boards that are straight-grained."
3
3
Thin the bend
Thin the bend
Cut two runners 10 ft long and 6 in wide from straight-grained 1 in ash. Where the curve will be, plane about 1/4 in off the upper side, but not at the very tip, so the skis bend more easily.
এই ধাপের উপকরণ:
শক্ত কাঠের তক্তা2 টুকরাপ্রয়োজনীয় সরঞ্জাম:
হাত-করাত
রান্দা
ফিতা-মাপ
পেনসিল4
4
Boil and bend
Boil and bend
If steaming is not handy, boil the skis with at least 1-1/2 ft of the points under water and the vessel covered so little steam escapes, for at least one hour. Take them out, put them side by side in the bending blocks at once and bend with slow, even pressure; weight the long ends and leave them 8 or 10 hours to dry. Sharpen the points after bending.
এই ধাপের উপকরণ:
পাইন কাঠের তক্তা1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
বড় হাঁড়ি
বার ক্ল্যাম্প
রান্দা5
5
Set the blocks and top
Set the blocks and top
For a slight rocker, make the centre knee block 6 in high and the two end blocks 5-1/2 in. Run a 1/4 in flat-head bolt through the ski, the block and the cross strip, countersinking the heads in the running surface. Make the top of three 6 in boards fastened to the crosspieces, and brace the ski tips with a 2 in strip.
এই ধাপের উপকরণ:
শক্ত কাঠের তক্তা1 টুকরা
পাইন কাঠের তক্তা3 টুকরা
গোল মাথার বোল্ট6 টুকরা
সমতল ওয়াশার6 টুকরা
কাঠের স্ক্রু1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
হাত-করাত
হাত-ড্রিল
কাউন্টারসিংক ড্রিল বিট সেট
হাতুড়ি6
6
Troubleshooting
Troubleshooting
Ski sled troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "A Ski Sled" by George J. Egelberg, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, p. 41). The bending-block shape and knee pieces come from his drawing. The tools and metric figures are ours.
উপকরণ
5- 2 টুকরাপ্লেসহোল্ডার
- 3 টুকরাপ্লেসহোল্ডার
- 6 টুকরাপ্লেসহোল্ডার
- 6 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
প্রয়োজনীয় সরঞ্জাম
9- প্লেসহোল্ডার
- প্লেসহোল্ডার
- 1 vendor sell this, none ship to you yetপ্লেসহোল্ডার
- 1 vendor sell this, none ship to you yetপ্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।


