সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Workbench for the Amateur: Mortised Maple Frame, Two-Board Top, Side and End Vises (Boy Mechanic, 1913)
Woody

তৈরি করেছেন

Woody

13. নভেম্বর 2026NO
৬
০
০
০
০

Workbench for the Amateur: Mortised Maple Frame, Two-Board Top, Side and End Vises (Boy Mechanic, 1913)

A full-size woodworking bench from The Boy Mechanic (Popular Mechanics, 1913), "suitable for the amateur woodworker" and made "by anyone who has a few sharp tools and a little spare time": a mortise-and-tenon frame of birch or maple bolted with lag screws, a top of a 2 in and a 1 in board, a side vise and an end vise on square slides, and a back board. All sizes are the book's. It stands 36 in high, 80 in long and 24 in deep.
মধ্যবর্তী
About 2 days

নির্দেশাবলি

1

Cutting list

Jupyter নোটবুক লোড হচ্ছে…
2

Read The Boy Mechanic

"If the stock is purchased from the mill ready planed and cut to length, much of the hard labor will be saved."
3

Make the lower frame

Cut tenons on the side and end rails and mortise the posts to take them. Fit them together and fasten them securely with 3/8 by 5 in lag screws through the posts into the rails, as the drawing shows.

এই ধাপের উপকরণ:

চৌকো চেরা কাঠচৌকো চেরা কাঠ1 টুকরা
ল্যাগ স্ক্রু (কোচ স্ক্রু)ল্যাগ স্ক্রু (কোচ স্ক্রু)1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

দুজনের আড়াআড়ি করাতদুজনের আড়াআড়ি করাত
পিঠ-দণ্ডযুক্ত করাতপিঠ-দণ্ডযুক্ত করাত
খাঁজ কাটার বাটালিখাঁজ কাটার বাটালি
কাঠের হাতুড়িকাঠের হাতুড়ি
স্থির গুনিয়াস্থির গুনিয়া
হাতে ঘোরানো তুরপুন ও ফলাহাতে ঘোরানো তুরপুন ও ফলা
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
পেনসিলপেনসিল
4

Fit the crosspieces and top

Screw the 1-1/2 by 3 by 24 in crosspieces to the tops of the posts, countersinking the heads (or bore the top boards to clear them). Fasten the front, 2 in top board to the crosspieces with lag screws from underneath; screw the 1 in top board down from the top.

এই ধাপের উপকরণ:

চৌকো চেরা কাঠচৌকো চেরা কাঠ1 টুকরা
শক্ত কাঠের মোটা তক্তাশক্ত কাঠের মোটা তক্তা1 টুকরা
শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা1 টুকরা
ল্যাগ স্ক্রু (কোচ স্ক্রু)ল্যাগ স্ক্রু (কোচ স্ক্রু)1 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাতে ঘোরানো তুরপুন ও ফলাহাতে ঘোরানো তুরপুন ও ফলা
কাউন্টারসিংক ড্রিল বিট সেটকাউন্টারসিংক ড্রিল বিট সেট
স্ক্রুড্রাইভার সেটস্ক্রুড্রাইভার সেট
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
5

Fit the end pieces and vise slides

Screw on the end pieces, countersinking the heads at the vise end. Cut 2 in square holes in the 1-1/2 by 4-1/2 by 10 in piece for the side vise slides and fit it in place, and cut square holes in one end piece for the end vise slides.

এই ধাপের উপকরণ:

শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা1 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাতে ঘোরানো তুরপুন ও ফলাহাতে ঘোরানো তুরপুন ও ফলা
বাটালিবাটালি
কাঠের হাতুড়িকাঠের হাতুড়ি
কাউন্টারসিংক ড্রিল বিট সেটকাউন্টারসিংক ড্রিল বিট সেট
স্ক্রুড্রাইভার সেটস্ক্রুড্রাইভার সেট
6

Fit up the two vises

Screw the 2 in square slides (guides) to the two clamp front pieces, countersinking the heads so they are clear of the hands. The clamp screws should be about 1-1/2 in diameter, bought at a hardware store. Fit a block under the crosspiece to hold the end vise's nut. With the slides in place, bore the holes for the clamp screws and fit them.

এই ধাপের উপকরণ:

চৌকো চেরা কাঠচৌকো চেরা কাঠ1 টুকরা
শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা1 টুকরা
সরণশীল লিভার হাতলসহ বাইস স্ক্রুসরণশীল লিভার হাতলসহ বাইস স্ক্রু2 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাতে ঘোরানো তুরপুন ও ফলাহাতে ঘোরানো তুরপুন ও ফলা
কাউন্টারসিংক ড্রিল বিট সেটকাউন্টারসিংক ড্রিল বিট সেট
স্ক্রুড্রাইভার সেটস্ক্রুড্রাইভার সেট
7

Back board and finish

Screw the back board to the back as the top view shows. Give the bench "a couple of coats of oil" to finish and preserve the wood (boiled linseed oil, ours).

এই ধাপের উপকরণ:

শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা1 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা
সিদ্ধ তিসির তেলসিদ্ধ তিসির তেল1 টুকরা
সুতির কাপড়সুতির কাপড়1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

স্ক্রুড্রাইভার সেটস্ক্রুড্রাইভার সেট
8

Troubleshooting

Workbench troubleshooting.

Flow

Loading...
9

History and honest limits

From **The Boy Mechanic, Volume 1: 700 Things for Boys to Do**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913 (Project Gutenberg #12655), "A Workbench for the Amateur". All sizes and the fastening are the book's; it names no oil, so boiled linseed oil is ours, as are the metric figures.

উপকরণ

8

প্রয়োজনীয় সরঞ্জাম

11

এই ব্লুপ্রিন্ট যা তৈরি করে

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...