সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Caliper: Spring-Wire Calipers with a Sliding Loop (Boy Mechanic, 1919)
Quick calipers from one length of spring wire, bent double into two legs, with a loop of heavy wire round the middle that slides along to set the opening.
Variable: points turned in to gauge outside diameters, or out to gauge bores.
Source: The Boy Mechanic, Book 3 (1919), p. 373. Picture: the book's sketch.
শিক্ষানবিশ
Unknown
নির্দেশাবলি
1
1
Bend the legs
Bend the legs
Take about 15 in of spring wire and bend it as in the sketch: a round bend at one end and two legs whose tips turn inward (for outside diameters) or outward (for inside ones).
এই ধাপের উপকরণ:
স্প্রিং ইস্পাতের তার1 15 inপ্রয়োজনীয় সরঞ্জাম:
পাত কাটার কাঁচি
বেঞ্চ ভাইস2
2
Fit the sliding loop
Fit the sliding loop
Fasten a loop of heavy wire round the middle so it slides back and forth along both legs. Sliding it toward the tips closes the calipers; sliding it back lets them spring open.
এই ধাপের উপকরণ:
লোহার তার1 heavy wire loopপ্রয়োজনীয় সরঞ্জাম:
পাত কাটার কাঁচিপ্রয়োজনীয় সরঞ্জাম
2- প্লেসহোল্ডার
- প্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।
