সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)
Forge

তৈরি করেছেন

Forge

14. নভেম্বর 2026NO
১০
০
০
০
০

Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)

How axes and hatchets were made of iron and shear steel, from George Edwinson's smithing series (Amateur Work, 1886): a flat iron bar folded round a tapering mandrel to make the eye, the leaves welded, and a thin slice of steel welded between them so the ground edge is always steel.
উন্নত
A day at the forge

নির্দেশাবলি

1

Read Edwinson

"By this means a layer of steel is enclosed between two layers of iron, and a steel edge is always ensured to the tool."
2

Fold the eye

Take flat iron of the width and thickness you want, twice the length of the blade. Heat it and bend it over a tapering mandrel the same section as the handle (his fig. 225).

এই ধাপের উপকরণ:

পেটানো লোহার দণ্ডপেটানো লোহার দণ্ড1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
নেহাইনেহাই
হাতুড়ি (ভারী)হাতুড়ি (ভারী)
কামারের সাঁড়াশিকামারের সাঁড়াশি
ছিদ্র বড় করার টেপার পাঞ্চছিদ্র বড় করার টেপার পাঞ্চ
3

Close and shape the eye

Weld the two leaves together where they meet near the eye. Reheat and forge the eye to shape on the mandrel, then drive the mandrel in the other way to open the inner edge of the eye slightly.

এই ধাপের উপকরণ:

সোহাগার গুঁড়োসোহাগার গুঁড়ো1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
নেহাইনেহাই
হাতুড়িহাতুড়ি
ছিদ্র বড় করার টেপার পাঞ্চছিদ্র বড় করার টেপার পাঞ্চ
4

Lay in the steel

Put a thin slice of shear steel, as wide as the axe, between the two leaves. Bring both to a welding heat and forge them down together to the thickness and width wanted.

এই ধাপের উপকরণ:

শিয়ার স্টিলের পাতশিয়ার স্টিলের পাত1 টুকরা
সোহাগার গুঁড়োসোহাগার গুঁড়ো1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
নেহাইনেহাই
হাতুড়ি (ভারী)হাতুড়ি (ভারী)
কামারের সাঁড়াশিকামারের সাঁড়াশি
5

Hatchet hammer (variant)

For a carpenter's hatchet (fig. 223) weld a rectangular piece of steel to the back of the eye and forge it down with it as the hammer. The miner's hatchet (fig. 224) has a massive ear, a bar-steel hammer and a slit in the blade for drawing nails. Do not make a woodman's axe square-headed: men drive wedges with the back and spoil it.

এই ধাপের উপকরণ:

মুচি ইস্পাতমুচি ইস্পাত1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
নেহাইনেহাই
হাতুড়িহাতুড়ি
গরম ছেনিগরম ছেনি
6

Pare and smooth

Pare the rough forging to shape with hot chisels (his setts) while hot. Hammer the sides well at a low red heat until smooth.

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
গরম ছেনিগরম ছেনি
নেহাইনেহাই
হাতুড়িহাতুড়ি
7

Harden, temper and grind

Harden and temper the blade, then grind it on a grindstone to sharpen the edge and polish the blade.

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
জল দেওয়ার বালতিজল দেওয়ার বালতি
ঘোরানো শানপাথরঘোরানো শানপাথর
8

Hang the head (ours)

He does not cover the handle. Ours: fit a hickory handle blank to the eye and wedge it.

এই ধাপের উপকরণ:

কাঠের কুড়ুল-হাতলের কাঁচা টুকরো (হিকরি)কাঠের কুড়ুল-হাতলের কাঁচা টুকরো (হিকরি)1 টুকরা
কাঠের গোঁজাকাঠের গোঁজা1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

দুই হাতলের টানা ছুরিদুই হাতলের টানা ছুরি
হাতুড়িহাতুড়ি
9

Troubleshooting

Axe troubleshooting.

Flow

Loading...
10

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and figs. 222-225. He gives no temper colour for axes, no sizes and no handle: those are ours.

উপকরণ

6

প্রয়োজনীয় সরঞ্জাম

10

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...