সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)
The builder's and fencer's crowbar from George Edwinson's smithing series (Amateur Work, 1886): a round iron bar 2 to 5 ft long with steel-pointed ends, one forged to a chisel, the other split hot into a fork and bent over into a nail-drawing claw, tempered purple.
মধ্যবর্তী
Half a day at the forge
নির্দেশাবলি
1
1
His sizes
His sizes
Jupyter নোটবুক লোড হচ্ছে…
2
2
Read Edwinson
Read Edwinson
"It is an ordinary round bar of iron with steel-pointed ends."
3
3
Choose the bar
Choose the bar
Take round bar iron of 1, 1 1/4 or 1 1/2 in (25, 32 or 38 mm), 2 to 5 ft (0.6-1.5 m) long. A bar of best tool steel may be lighter.
এই ধাপের উপকরণ:
পেটানো লোহার দণ্ড1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
গরম ছেনি4
4
Steel the ends (ours, after his pick method)
Steel the ends (ours, after his pick method)
Split each end hot, weld a steel wedge into the cleft under borax and draw it out, as for a pick point.
এই ধাপের উপকরণ:
মুচি ইস্পাত1 টুকরা
সোহাগার গুঁড়ো1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
কামারের ভাটি
গরম ছেনি
নেহাই
হাতুড়ি (ভারী)
কামারের সাঁড়াশি5
5
Forge the chisel end
Forge the chisel end
Forge one end to a chisel shape. Keep the steel no hotter than red and hammer it lightly at that heat.
প্রয়োজনীয় সরঞ্জাম:
কামারের ভাটি
নেহাই
হাতুড়ি
কামারের সাঁড়াশি6
6
Forge the claw
Forge the claw
Forge the other end to a chisel shape too, split it hot into a fork with the hot chisel, and bend the fork over to form the claw. For a quarryman's bar leave out the claw and bend one chisel end over as a short lever.
প্রয়োজনীয় সরঞ্জাম:
কামারের ভাটি
গরম ছেনি
নেহাই
হাতুড়ি
কামারের সাঁড়াশি7
7
Harden and temper
Harden and temper
Harden the steeled ends and temper them to a purple, the best tint for crowbars.
প্রয়োজনীয় সরঞ্জাম:
কামারের ভাটি
জল দেওয়ার বালতি8
8
Troubleshooting
Troubleshooting
Crowbar troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and fig. 220. The steel wedges follow his pick method; the metric figures and tools are ours.
উপকরণ
3- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।


