সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Plough Coupling Strap: Cross-Strap With Buckled Billets for a Pair of Horses (Hasluck, Harness Making, 1904)
When two horses plough side by side, a coupling strap ties them together so they keep level. This is the coupling from Paul N. Hasluck's Harness Making (1904): a 1 in strap 28 in to 30 in long with a buckled billet at each end, buckled from the mouth of one horse to the other. Every size is his; the picture is our diagram.
শিক্ষানবিশ
About 2 hours
নির্দেশাবলি
1
1
His sizes in centimetres
His sizes in centimetres
Jupyter নোটবুক লোড হচ্ছে…
2
2
Read Harness Making, ch. IX
Read Harness Making, ch. IX
"Couplings are also a necessary part of plough gear. In some localities only cross-straps are employed from mouth to mouth when ploughing in pairs."
3
3
Cut the strap
Cut the strap
Cut the strap 1 in wide and 28 in to 30 in long. Turn it in about 1 in at each end, make a hole for the buckle, and shave the points.
এই ধাপের উপকরণ:
হার্নেসের চামড়া1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
চামড়া কাটার ছুরি
চামড়ার ছিদ্র করার পাঞ্চ
ফিতা-মাপ4
4
Make the billets
Make the billets
Cut two billets the same width, 1 ft long; trim them to a point at one end and shave the other. Edge them and crease them (the book prints "edge back, and crease them", probably for "edge, black").
এই ধাপের উপকরণ:
হার্নেসের চামড়া1 টুকরা
চামড়ার রং1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
চামড়া কাটার ছুরি
প্রান্ত চাঁছার যন্ত্র
ভাঁজ করার সরঞ্জাম
প্রোপেন মশাল5
5
Put it together
Put it together
Put the buckle in, then the thin end of the billet 2 in down at the back of the buckle. Put a loop between the chape by the buckle, and stitch one billet and buckle at each end. Punch two holes in each billet.
এই ধাপের উপকরণ:
জিভওয়ালা লোহার বকলস2 টুকরা
হার্নেসের চামড়া1 টুকরা
চামড়ার সুতা1 টুকরা
মৌমাছির মোম1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
লুপ স্টিক
আউল (ছিদ্রকারী)
দুটি জিন-সেলাইয়ের সুচ
চামড়া সেলাইয়ের কাঠের চিমটা
চামড়ার ছিদ্র করার পাঞ্চ6
6
Crossing couplings for a pair
Crossing couplings for a pair
Sometimes two coupling straps are used for a pair, crossing each other from the hames of each horse to the mouth of the other. Make them the same way but longer: 38 in, each with 12 in billets. Some are made a foot longer and cut in two, one end 15 in long with a buckle and loop and the other made to buckle on, with many holes. Then the coupling can be shortened on a young horse's side, to keep it back until it has learned the ordinary working pace.
এই ধাপের উপকরণ:
হার্নেসের চামড়া1 টুকরা
জিভওয়ালা লোহার বকলস4 টুকরা
চামড়ার সুতা1 টুকরা
মৌমাছির মোম1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
চামড়া কাটার ছুরি
লুপ স্টিক
আউল (ছিদ্রকারী)
দুটি জিন-সেলাইয়ের সুচ
চামড়ার ছিদ্র করার পাঞ্চ
ফিতা-মাপ7
7
Troubleshooting
Troubleshooting
Coupling strap troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **Harness Making**, edited by Paul N. Hasluck, Cassell, 1904 (Project Gutenberg 70169), chapter IX, "Plough Harness", couplings, pp. 110-111; every figure was checked on the archive.org scan (harnessmaking00hasl). He gives no buckle size; a 1 in buckle suits the 1 in strap. The picture is our diagram from his text. The tools and metric figures are ours.
উপকরণ
5- 4 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 4 টুকরাপ্লেসহোল্ডার
- 2 টুকরাপ্লেসহোল্ডার
- 2 টুকরাপ্লেসহোল্ডার
প্রয়োজনীয় সরঞ্জাম
10- প্লেসহোল্ডার
- প্লেসহোল্ডার
- 1 vendor sell this, none ship to you yetপ্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।


