সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Screw Auger: a Steel Blade Twisted Red-Hot, with a Worm, Two Lips and an Eye for the Cross Handle (Holtzapffel, 1846)
Forge

তৈরি করেছেন

Forge

14. নভেম্বর 2026NO
১০
০
০
০
০

Screw Auger: a Steel Blade Twisted Red-Hot, with a Worm, Two Lips and an Eye for the Cross Handle (Holtzapffel, 1846)

How the common English screw auger was made, from Holtzapffel's Turning and Mechanical Manipulation: a parallel steel blade twisted red-hot, a worm at the point to pull it into the wood, two lips sharpened to cut, and the shaft end forged into an eye for a tightly driven cross handle.
উন্নত
A day at the forge

নির্দেশাবলি

1

Twist count

Jupyter নোটবুক লোড হচ্ছে…
2

Read Holtzapffel

"The ordinary screw auger ... is forged as a parallel blade of steel ... it is twisted red-hot."
3

Forge the blade

Draw a steel bar out into a flat, parallel blade, leaving a round end for the shaft. Width, thickness and length are ours: make the blade as wide as the hole you want.

এই ধাপের উপকরণ:

যন্ত্র-ইস্পাতের দণ্ডযন্ত্র-ইস্পাতের দণ্ড1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
নেহাইনেহাই
হাতুড়িহাতুড়ি
কামারের সাঁড়াশিকামারের সাঁড়াশি
ফুলার (নালি কাটার লোহা)ফুলার (নালি কাটার লোহা)
4

Twist it red-hot

Heat the blade to red, grip one end in the vice and twist the other with a wrench into an even double spiral. Twist in short heats and keep the pitch even.

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
বেঞ্চ ভাইসবেঞ্চ ভাইস
ট্যাপ ঘোরানোর হাতলট্যাপ ঘোরানোর হাতল
কামারের সাঁড়াশিকামারের সাঁড়াশি
5

Form the worm and lips

File the point into a worm (a small tapered screw, as on a gimlet) that pulls the auger into the work. Shape and sharpen the two corners, or lips, to cut at the very ends and a little up the sides.

প্রয়োজনীয় সরঞ্জাম:

বেঞ্চ ভাইসবেঞ্চ ভাইস
রেতি (হাতের রেতি)রেতি (হাতের রেতি)
6

Forge the eye

Forge the top of the shaft into a ring or eye.

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
নেহাইনেহাই
হাতুড়িহাতুড়ি
কামারের সাঁড়াশিকামারের সাঁড়াশি
7

Harden and temper (ours)

He gives no hardening. Ours: harden the cutting end and temper it as for other wood-cutting edge tools, then hone the lips.

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
জল দেওয়ার বালতিজল দেওয়ার বালতি
শান দেওয়ার পাথরশান দেওয়ার পাথর
8

Fit the cross handle

Shape a hardwood bar and drive it tightly through the eye as a transverse handle.

এই ধাপের উপকরণ:

শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

দুই হাতলের টানা ছুরিদুই হাতলের টানা ছুরি
হাতুড়িহাতুড়ি
9

Troubleshooting

Screw auger troubleshooting.

Flow

Loading...
10

History and honest limits

From Charles Holtzapffel, **Turning and Mechanical Manipulation**, vol. II (1846), pp. 540, 543 and 545-546 (checked on the archive.org scan turningmechanica02holtuoft). He also describes the single-lip auger: a half-round bar coiled into an open spiral with the flat side outwards, the end shaped like a shell auger. He gives no sizes or heat treatment: those, the tools and the handle wood are ours.

উপকরণ

2

প্রয়োজনীয় সরঞ্জাম

11

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...