সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Industrial Air Compressor: a Converted Motorcycle Engine, Motor-Driven (Shop Notes, 1919)
A workshop compressor driven by a 1 hp electric motor: an old single-cylinder motorcycle engine rebored and run as a pump, its exhaust port blanked, its own automatic inlet valve taking in air, and a ball check valve in the spark-plug hole sending air to a tank.
Source: Popular Mechanics Shop Notes for 1919, pp. 3166-3167. Unknown: tank, belt and sizes. Picture: the article's drawing.
মধ্যবর্তী
Unknown
নির্দেশাবলি
1
1
Recondition the cylinder
Recondition the cylinder
Rebore the old engine and fit a new piston for good compression. Remove the exhaust valve and bolt a steel plate, with a gasket under it, over the exhaust port. Leave the automatic inlet valve as it is: it now draws in air.
এই ধাপের উপকরণ:
অজানা উপাদান1 old motorcycle engine
পিস্টন ও সংযোগ দণ্ডের সমষ্টি1 new piston
নরম ইস্পাতের প্লেট1 blanking plate
গ্যাসকেট1 টুকরা
ষড়ভুজ মাথার বোল্ট - শ্রেণি 8.81 টুকরাপ্রয়োজনীয় সরঞ্জাম:
বোরিং বার
ধাতুর খরাদ যন্ত্র
হাত-ড্রিল
সমন্বয়যোগ্য রেঞ্চ2
2
Fit the outlet
Fit the outlet
In place of the priming cock on top of the cylinder (the drawing shows it screwed into the spark-plug hole) fit a ball-valve hose connection, and run its hose to the air tank.
এই ধাপের উপকরণ:
বল চেক ভালভ1 টুকরা
এয়ার হোস1 টুকরা
অজানা উপাদান1 air tankপ্রয়োজনীয় সরঞ্জাম:
সমন্বয়যোগ্য রেঞ্চ3
3
Fit the drive and mount it
Fit the drive and mount it
Fit a longer main shaft and key an ordinary shaft pulley on its end. Leave the old flywheel in place for momentum. Bolt steel lugs to the floor and fasten the engine base to them. Belt it to a 1 hp, 110 volt motor, and put oil in the crankcase for splash lubrication.
এই ধাপের উপকরণ:
নরম ইস্পাতের গোল দণ্ড1 longer main shaft
কপিকল1 টুকরা
নরম ইস্পাতের প্লেট1 floor lugs
ষড়ভুজ মাথার বোল্ট - শ্রেণি 8.81 টুকরা
বৈদ্যুতিক মোটর1 1 hp, 110 V
মেশিন তেল1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
ধাতুর খরাদ যন্ত্র
সমন্বয়যোগ্য রেঞ্চউপকরণ
11- 1 air tankপ্লেসহোল্ডার
- 1 new pistonপ্লেসহোল্ডার
- 1 floor lugsপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- প্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 longer main shaftপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 1 hp, 110 Vপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।
