সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Hind Horseshoe: Round-Pointed Toe, No Seating, Nail Holes in the Front Two-Thirds (Lungwitz and Adams, Text-Book of Horseshoeing, 1913)
Forge

তৈরি করেছেন

Forge

13. নভেম্বর 2026NO
৩
০
০
০
০

Hind Horseshoe: Round-Pointed Toe, No Seating, Nail Holes in the Front Two-Thirds (Lungwitz and Adams, Text-Book of Horseshoeing, 1913)

A flat hind horseshoe from Lungwitz and Adams, A Text-Book of Horseshoeing (1913). It is made "in like manner" as the front shoe, but the branches are bent to a different curve, giving a round-pointed toe, the hoof side is not concaved, and the nail holes run further back. Fitting and nailing the shoe to the horse, calks and clips are not covered here.
মধ্যবর্তী
8-15 minutes a pair, once practised

নির্দেশাবলি

1

Bar length and sizes

Jupyter নোটবুক লোড হচ্ছে…
2

Read Lungwitz and Adams

"The hind shoe is made in like manner, but the branches are not bent in a circle but given that form shown in Fig. 106."
3

Measure and cut the bar

Measure the hoof from the point of the toe to the buttress and its greatest width; add them for the bar length. Trace the outline on stiff paper if you want to keep it. Cut the bar.

এই ধাপের উপকরণ:

পেটানো লোহার দণ্ডপেটানো লোহার দণ্ড1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

ফিতা-মাপফিতা-মাপ
পেনসিলপেনসিল
মোটা কাগজের পাতমোটা কাগজের পাত
কামারের ভাটিকামারের ভাটি
নেহাইয়ের কাটার ছেনিনেহাইয়ের কাটার ছেনি
কামারের সাঁড়াশিকামারের সাঁড়াশি
4

Bend the outer branch to the hind curve

Heat the bar white-hot just beyond its middle and bend it over the sledge head on the anvil face with the turning hammer, as for the front shoe, but bend the branch to the flatter, angled curve of his Fig. 106, not to a circle. The outer branch is made first, the right shoe first in a pair. Draw out the end with the sledge.

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
ঠোঁটওয়ালা ছোট নেহাইঠোঁটওয়ালা ছোট নেহাই
স্লেজস্লেজ
গোল করার হাতুড়িগোল করার হাতুড়ি
কামারের সাঁড়াশিকামারের সাঁড়াশি
5

Bevel, flatten and shape

Bevel the branch on the horn, then flatten it. Bending the toe of a hind shoe backs up the inner edge and thins the outer, so hammer the shoe smooth and even. Shape it so the toe is round-pointed, "yet not too much so", as in his Fig. 116.

প্রয়োজনীয় সরঞ্জাম:

ঠোঁটওয়ালা ছোট নেহাইঠোঁটওয়ালা ছোট নেহাই
গোল করার হাতুড়িগোল করার হাতুড়ি
কামারের সাঁড়াশিকামারের সাঁড়াশি
6

Round the inner edge and fuller

Concaving is not necessary: just round the inner edge of the web. Fuller the ground side as for the front shoe, to about two-thirds of the thickness.

প্রয়োজনীয় সরঞ্জাম:

ঠোঁটওয়ালা ছোট নেহাইঠোঁটওয়ালা ছোট নেহাই
ফুলার (নালি কাটার লোহা)ফুলার (নালি কাটার লোহা)
স্লেজস্লেজ
গোল করার হাতুড়িগোল করার হাতুড়ি
কামারের সাঁড়াশিকামারের সাঁড়াশি
7

Stamp the nail holes

Stamp and pritchel the nail holes in the front two-thirds of the shoe, none at the toe: usually one more than a front shoe, seldom more than eight. Set each as far from the outer edge as the wall is thick; on a hind hoof the wall is nearly as thick at the quarters as at the toe.

প্রয়োজনীয় সরঞ্জাম:

ঠোঁটওয়ালা ছোট নেহাইঠোঁটওয়ালা ছোট নেহাই
গরম ছিদ্রকারীগরম ছিদ্রকারী
নালের ছিদ্র করার ছেনিনালের ছিদ্র করার ছেনি
গোল করার হাতুড়িগোল করার হাতুড়ি
কামারের সাঁড়াশিকামারের সাঁড়াশি
8

Make the second branch and finish

Make the inner branch the same way, turned to the left. Go over the outer edge on the horn and hammer the bearing surface smooth and level. Rough it out in two heats if you can.

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
ঠোঁটওয়ালা ছোট নেহাইঠোঁটওয়ালা ছোট নেহাই
গোল করার হাতুড়িগোল করার হাতুড়ি
ফুলার (নালি কাটার লোহা)ফুলার (নালি কাটার লোহা)
গরম ছিদ্রকারীগরম ছিদ্রকারী
নালের ছিদ্র করার ছেনিনালের ছিদ্র করার ছেনি
কামারের সাঁড়াশিকামারের সাঁড়াশি
9

Troubleshooting

Hind shoe troubleshooting.

Flow

Loading...
10

History and honest limits

From **A Text-Book of Horseshoeing**, by A. Lungwitz and John W. Adams, 11th edition, J. B. Lippincott, 1913 (Project Gutenberg 66786), chapter III F. His Fig. 116 shows a hind shoe with toe- and heel-calks; the calks and the toe-clip are not made here, as this chapter gives no method for forging heel-calks or drawing clips. Fitting and nailing are not covered. The metric figures are ours.

উপকরণ

1

প্রয়োজনীয় সরঞ্জাম

12

এই ব্লুপ্রিন্ট যা তৈরি করে

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...