কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Oriented Barium Ferrite Disc Magnet: Water Instead of a Binder (Gorter, Philips 1956, Ex. 5)
A ceramic magnet from pre-fired barium ferrite powder stirred into water, oriented in a magnetic field in the die, moulded into blocks and fired as in Example 4. In the principal direction it held 2,870 gauss with a coercive force of 1,610 oersted and a (BH)max of 1.57 × 10⁶; at right angles 1,625 gauss.
Source: E. W. Gorter, G. W. Rathenau and A. L. Stuyts (Philips), US 2,762,778 (1956), Example 5. They made blocks; disc size is ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
উন্নত
3 days
নির্দেশাবলি
1
1
Weigh barium carbonate and iron oxide
Weigh barium carbonate and iron oxide
Weigh 450 g barium carbonate and 2000 g ferric oxide. Barium carbonate is poisonous if swallowed: gloves and a dust respirator.
এই ধাপের উপকরণ:
বেরিয়াম কার্বনেট (উইদারাইট)450 গ্রা
ফেরিক অক্সাইড2000 গ্রাপ্রয়োজনীয় সরঞ্জাম:
সমবাহু দাঁড়িপাল্লা
রাবারের দস্তানা
P100 শ্বাসরক্ষক2
2
Mill 20 hours under alcohol, dry
Mill 20 hours under alcohol, dry
Grind the mixture in a ball mill under alcohol for 20 hours, then dry it.
প্রয়োজনীয় সরঞ্জাম:
লোহার বল মিল
ইথানল - গবেষণাগার শ্রেণি, 95 %
শুকানোর চুল্লি3
3
Pre-fire: through a 1100 °C zone in 10 minutes
Pre-fire: through a 1100 °C zone in 10 minutes
Pass the dry powder at 20 mm per minute through an electric furnace with a 20 cm hot zone at 1100 °C, in air: 10 minutes in the heat. Let it cool.
প্রয়োজনীয় সরঞ্জাম:
টিউব ফার্নেস
ঢাকনাসহ মুচি (চিনামাটির)
তাপরোধী দস্তানা4
4
Grind 12 hours with alcohol, dry
Grind 12 hours with alcohol, dry
Pulverise the pre-fired material in a ball mill with alcohol for 12 hours, then dry it. This is the pre-fired powder.
প্রয়োজনীয় সরঞ্জাম:
লোহার বল মিল
ইথানল - গবেষণাগার শ্রেণি, 95 %
শুকানোর চুল্লি5
5
Stir into water
Stir into water
Stir the pre-fired powder with water, 2 cc of water per gram of powder.
প্রয়োজনীয় সরঞ্জাম:
পাতিত জল6
6
Orient in a first field and mould
Orient in a first field and mould
Put the suspension in a moulding die, apply a first magnetic field and mould it into blocks. The patent does not give this field's strength.
প্রয়োজনীয় সরঞ্জাম:
ডিস্ক চাপার ডাই
তড়িৎ-চুম্বক
হাইড্রলিক প্রেস7
7
Heat to 500 °C in a 2000 oersted field
Heat to 500 °C in a 2000 oersted field
Put the block in an electric furnace between the magnet's poles. With a second field of 2000 oersted along the first field's direction, heat to 500 °C, which burns off the rest of the binder. Then switch the field off.
প্রয়োজনীয় সরঞ্জাম:
টিউব ফার্নেস
তড়িৎ-চুম্বক
তাপরোধী দস্তানা8
8
Sinter: through a 1280 °C zone in 5 minutes
Sinter: through a 1280 °C zone in 5 minutes
Pass the block at 20 mm per minute through an electric furnace in air at 1280 °C with a 10 cm hot zone: about 5 minutes in the heat.
প্রয়োজনীয় সরঞ্জাম:
টিউব ফার্নেস
তাপরোধী দস্তানা9
9
Magnetise in the principal direction
Magnetise in the principal direction
Magnetise the block along the direction of the first field, the principal direction. The patent magnetises it in a field in that direction; ours: an electromagnet. Find the north face with a compass.
প্রয়োজনীয় সরঞ্জাম:
তড়িৎ-চুম্বক
দিকনির্ণয় যন্ত্রউপকরণ
2- 450 গ্রাপ্লেসহোল্ডার
- 2000 গ্রাপ্লেসহোল্ডার
প্রয়োজনীয় সরঞ্জাম
14- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

