কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Piston-Pump Egg Beater: Pump the Eggs Through a Grate
YourGrandma

তৈরি করেছেন

YourGrandma

6. অক্টোবর 2026IS
৫
০
০
০
০

Piston-Pump Egg Beater: Pump the Eggs Through a Grate

A whisk stirs the eggs; it does not force them through anything. J. J. Parker of Marietta, Ohio, received US 25,038, dated 9 August 1859, for an egg beater and churn combined: a tin tube with square openings at its lower end and a piston inside, worked up and down "in the manner of a pump" by a crank, which "draws the eggs in and out through the grate bars until they are completely torn in pieces or made perfectly fine and frothy"; a band turned round the tube's foot closes the openings to vary the agitation. This rung works out the jet speed at each band setting, then prints the tube, band and piston, fits the crank, and times a beating at two settings.
মধ্যবর্তী
About 3 hours, plus printing

নির্দেশাবলি

1

Jet speed at each setting

Jupyter নোটবুক লোড হচ্ছে…
2

The churning it also does

The embedded blueprint churns cream to butter. Parker's pump-tube does the same when worked longer in cream.
3

Read US 25,038

"At the lower end of the tube is a band of about one half an inch in width loosely fitted with openings one fourth of an inch square and corresponding exactly with the openings in the tube and of the same size, so that by turning the band around either way the openings are closed or made smaller at pleasure, so as to produce more or less agitation in the eggs or cream. This band has a bottom with grate like bars cut or made in it."
4

Print the tube, band and piston

Print the tube (/uploads/blueprints/piston-pump-egg-beater-tube.stl), the band with its grate (/uploads/blueprints/piston-pump-egg-beater-band.stl) and the piston disk (/uploads/blueprints/piston-pump-egg-beater-piston.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.

এই ধাপের উপকরণ:

PETG ফিলামেন্টPETG ফিলামেন্ট1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

ফিলামেন্টের 3D প্রিন্টার (FDM)ফিলামেন্টের 3D প্রিন্টার (FDM)
5

Pack the piston

Cut a leather disk 2 mm larger than the piston. Clamp it between the printed disk and a washer on an M3 rod end with a nut, so its edge seals the tube.

এই ধাপের উপকরণ:

চামড়াচামড়া1 টুকরা
সমতল ওয়াশারসমতল ওয়াশার1 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম1 টুকরা
যন্ত্র-স্ক্রুযন্ত্র-স্ক্রু1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কারুকাজের ছুরিকারুকাজের ছুরি
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
ডিজিটাল ক্যালিপার ৬ ইঞ্চিডিজিটাল ক্যালিপার ৬ ইঞ্চি
6

Post and crank

Epoxy a 4 mm wire post up the tube's side, bent at its top into bearings 100 mm above the tube. Bend a crank shaft of 3 mm wire with a 22 mm crank one end and a handle the other, and link the crank to the rod with a wire pitman.

এই ধাপের উপকরণ:

নরম ইস্পাতের গোল দণ্ডনরম ইস্পাতের গোল দণ্ড1 টুকরা
স্টেইনলেস স্টিলের তারস্টেইনলেস স্টিলের তার1 টুকরা
দুই উপাদানের ইপক্সিদুই উপাদানের ইপক্সি1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

বেঞ্চ ভাইসবেঞ্চ ভাইস
গোল মুখের সাঁড়াশিগোল মুখের সাঁড়াশি
চ্যাপ্টা মুখের সাঁড়াশিচ্যাপ্টা মুখের সাঁড়াশি
হ্যাকসহ্যাকস
স্বচ্ছ নিরাপত্তা-চশমাস্বচ্ছ নিরাপত্তা-চশমা
7

The patent drawing

US 25,038 drawing sheet, public domain (expired patent).
ধাপ 7 - Image 1
8

Beat at two settings

Stand the beater in a bowl with two eggs and a spoon of sugar. Crank twice a second with the band fully open and time to a fine froth; repeat with the band half closed.
ধাপ 8 - Image 1

এই ধাপের উপকরণ:

ডিমডিম4 টুকরা
দানা চিনিদানা চিনি1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

স্টেনলেস স্টিলের বড় মেশানোর বাটিস্টেনলেস স্টিলের বড় মেশানোর বাটি
স্টপওয়াচস্টপওয়াচ
9

A pump that leaks past, sticks or splashes

Piston-pump egg beater troubleshooting.

Flow

Loading...
10

History and honest limits

**J. J. Parker** of Marietta, Ohio, received US 25,038, dated 9 August 1859. His smaller machine's tube is one and a half inches across and one and five eighths deep; the crank shaft is No. 7 wire with a seven-eighths-inch crank; the piston is two oval pieces of thin metal with leather between, its edges forced out by pressing them together. It may also be worked by a handle on the rod instead of a crank. **Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed PETG stands in for tin. The notebook treats the flow as steady. Your times are the result.

উপকরণ

10

প্রয়োজনীয় সরঞ্জাম

11

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...