সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Rack-and-Pinion Router With a Zero-Set Knob: Two Knobs on One Hollow Pinion, Set to Zero on the Work (Rees, 1969)
Forge

তৈরি করেছেন

Forge

13. নভেম্বর 2026NO
৭
০
০
০
০

Rack-and-Pinion Router With a Zero-Set Knob: Two Knobs on One Hollow Pinion, Set to Zero on the Work (Rees, 1969)

Spencer C. Rees of Pickens, South Carolina, received US 3,466,973, dated 16 September 1969, for The Singer Company. A rack screwed to the motor housing is moved by a pinion through a window in a box on the base. The pinion is a hollow shaft running in one bore through the box's two side lugs, with a knob at each end. One knob turns it. The other, a zero-set knob with graduations, slips on its sleeve against an O-ring, so it can be set to zero with the bit touching the work. One screw through the middle holds it all together. Only the pinion shaft was metal; the rest was moulded. We print every part in PETG round a small DC motor. The sizes are ours.
উন্নত
About 3 days

নির্দেশাবলি

1

What one turn of the knob does

Jupyter নোটবুক লোড হচ্ছে…
2

Read US 3,466,973

"The zero-set knob 40 has a reduced diameter portion 51 which carries circumferentially-spaced graduation marks 52 on its surface." "In the above-described structure it will be noted that the only metallic part required is the pinion shaft 37 which is a relatively simple two-diameter piece."
3

Print the base

The base 10: the split ring with clamp lugs, the box 28 for the rack with its two lugs 50 and stepped bore 33, the window 36, two legs 11 down to the plate 12 with its aperture, and two handle arms. Print it plate down. PETG, 0.2 mm layers, 40 % infill, 5 walls.
নকশা ফাইলSTLCC0 - Free
4

Print the motor housing

The housing 19: a tube for a 42 mm motor, 56 mm outside, a ledge with an 18 mm hole and two M4 holes, and two M3 holes for the rack. Print it ledge down. PETG, 0.2 mm layers, 40 % infill, 5 walls.
নকশা ফাইলSTLCC0 - Free
5

Print the small parts

One plate: the rack 29 (module 1.5), the hollow pinion shaft 37 with its toothed (splined) part, bearing part and end ribs, the adjusting knob 38 with grooves, the flanged sleeve 39, the zero-set knob 40 with 20 graduations and an O-ring groove, and the cover plate 53 with its window 55 and mark 56. PETG, 0.2 mm layers, 40 % infill, 5 walls.
নকশা ফাইলSTLCC0 - Free
6

Motor in the housing

Fit the collet adapter on the motor's shaft, stand the motor in the housing on its ledge and screw it down with two M4 screws; wire it through a toggle switch to the DC supply. Screw the rack to the housing's front with two M3 screws.

এই ধাপের উপকরণ:

PETG ফিলামেন্টPETG ফিলামেন্ট1 টুকরা
বৈদ্যুতিক মোটরবৈদ্যুতিক মোটর1 টুকরা
মোটর শ্যাফটের কলেট অ্যাডাপ্টারমোটর শ্যাফটের কলেট অ্যাডাপ্টার1 টুকরা
ষড়ভুজ খাঁজের বেলন-মাথা স্ক্রুষড়ভুজ খাঁজের বেলন-মাথা স্ক্রু2 টুকরা
যন্ত্র-স্ক্রুযন্ত্র-স্ক্রু2 টুকরা
টগল সুইচটগল সুইচ1 টুকরা
হুক-আপ তারহুক-আপ তার1 টুকরা
তাপে সংকুচিত নলতাপে সংকুচিত নল1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

ফিলামেন্টের 3D প্রিন্টার (FDM)ফিলামেন্টের 3D প্রিন্টার (FDM)
সরাসরি প্রবাহের বিদ্যুৎ উৎসসরাসরি প্রবাহের বিদ্যুৎ উৎস
বৈদ্যুতিক সোল্ডারিং আয়রনবৈদ্যুতিক সোল্ডারিং আয়রন
অ্যালেন চাবির সেটঅ্যালেন চাবির সেট
স্ক্রুড্রাইভার সেটস্ক্রুড্রাইভার সেট
ছাঁট তোলার যন্ত্রছাঁট তোলার যন্ত্র
7

Base and handles

Turn two hardwood handles 17 and bolt one to each arm with an M8 bolt. Slide the housing into the base with the rack in the box's channel, and put an M5 screw with a wing nut through the clamp lugs.

এই ধাপের উপকরণ:

শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা1 টুকরা
ষড়ভুজ বোল্টের সংগ্রহষড়ভুজ বোল্টের সংগ্রহ2 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম3 টুকরা
ষড়ভুজ খাঁজের বেলন-মাথা স্ক্রুষড়ভুজ খাঁজের বেলন-মাথা স্ক্রু1 টুকরা
প্রজাপতি নাটপ্রজাপতি নাট1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কাঠের লেদকাঠের লেদ
তারবিহীন তুরপুনতারবিহীন তুরপুন
ড্রিল-বিট সেটড্রিল-বিট সেট
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
8

Pinion, knobs and cover

Push the pinion shaft through the box's bore from the right, its toothed part through the window meshing with the rack, its bearing part in the right lug. Fit the O-ring in the zero-set knob's groove, push the sleeve into the knob, and slide them onto the shaft's toothed end from the left, the sleeve in the left lug. Fit the adjusting knob on the right end, its grooves on the shaft's ribs. Pass a long M4 screw through knob, shaft and sleeve with a washer, into a nut in the sleeve, and tighten it until the knobs have only a little end play. Screw the cover over the box with two M3 screws.

এই ধাপের উপকরণ:

ও-রিংও-রিং1 টুকরা
ষড়ভুজ খাঁজের বেলন-মাথা স্ক্রুষড়ভুজ খাঁজের বেলন-মাথা স্ক্রু1 টুকরা
সমতল ওয়াশারসমতল ওয়াশার1 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম1 টুকরা
যন্ত্র-স্ক্রুযন্ত্র-স্ক্রু2 টুকরা

প্রয়োজনীয় সরঞ্জাম:

অ্যালেন চাবির সেটঅ্যালেন চাবির সেট
স্ক্রুড্রাইভার সেটস্ক্রুড্রাইভার সেট
9

Set zero and rout

Fit a bit. Loosen the clamp, turn the adjusting knob until the bit's tip touches the work, then turn the zero-set knob alone until its zero lines up with the cover's mark. Turn the adjusting knob to the depth wanted, read off the graduations, and clamp. Rout with both hands on the handles.

প্রয়োজনীয় সরঞ্জাম:

রাউটার বিট সেটরাউটার বিট সেট
শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা
বার ক্ল্যাম্পবার ক্ল্যাম্প
ডিজিটাল ক্যালিপার ৬ ইঞ্চিডিজিটাল ক্যালিপার ৬ ইঞ্চি
সুরক্ষা চশমাসুরক্ষা চশমা
10

Troubleshooting

Rack and pinion router troubleshooting.

Flow

Loading...
11

History and honest limits

**Spencer C. Rees** of Pickens, South Carolina, assignor to The Singer Company, US 3,466,973, dated 16 September 1969, filed 8 January 1968. He claimed a rack on the motor housing, "a pair of lugs formed on the base in fixed spaced relation on opposite sides of the rack and having aligned cylindrical apertures", a hollow pinion shaft, an adjusting knob, a flanged sleeve, "a zero-set knob frictionally coupled to said sleeve", and "single fastening means" through them all. His pinion shaft was metal and the rest moulded; ours is all printed. His motor ran on mains; ours is a small DC motor. He gives no sizes; every size here is ours.

উপকরণ

14

প্রয়োজনীয় সরঞ্জাম

15

ডিজাইন ফাইল

3

এই ব্লুপ্রিন্ট যা তৈরি করে

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...