সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)
Forge

তৈরি করেছেন

Forge

4. নভেম্বর 2026NO
১১
০
০
১
০

Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)

A square tinplate teapot from a picnic outfit: folded from one blank, with a hinged lid, and a cock at the bottom behind a perforated strainer that holds back the leaves. Blank 1 ft 4 1/4 in by 1 ft 0 3/8 in; lid 4 1/8 by 4 in. Source: Paul N. Hasluck, Tinplate Work (1907), pp. 37-39. Unknown: folding order, solder, the cock. Picture: Figs. 96-97 of the book.
মধ্যবর্তী
Unknown

নির্দেশাবলি

1

Cut the body blank

Cut a piece of tin 1 ft 4 1/4 in long by 1 ft 0 3/8 in wide and mark the pattern of Fig. 96 on it, with the hole for the cock tube. Not given: the folding order. Ours: bend it up on the dotted lines and solder the seams.

এই ধাপের উপকরণ:

টিন-মোড়া পাতটিন-মোড়া পাত1 body
টিন-সিসার ঝালাইটিন-সিসার ঝালাই1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

দাগ টানার শলাকাদাগ টানার শলাকা
পাত কাটার কাঁচিপাত কাটার কাঁচি
খোঁটাখোঁটা
কাঠের হাতুড়িকাঠের হাতুড়ি
বৈদ্যুতিক সোল্ডারিং আয়রনবৈদ্যুতিক সোল্ডারিং আয়রন
ফ্লাক্সফ্লাক্স
2

Fit the cock and strainer

Solder a tube about 1/2 in long into the hole for the cock (Fig. 97) and fit the cock to it. Develop the strainer (Fig. 98): top curve radius 1 13/16 in, chord corner to corner 2 15/16 in. Perforate it and solder it across the corner in front of the tube (Fig. 99).

এই ধাপের উপকরণ:

পিতলের নলপিতলের নল1 1/2 in
নিষ্কাশন কলনিষ্কাশন কল1 টুকরা
টিন-মোড়া পাতটিন-মোড়া পাত1 strainer
টিন-সিসার ঝালাইটিন-সিসার ঝালাই1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

দুই ফলাযুক্ত কম্পাসদুই ফলাযুক্ত কম্পাস
পাত কাটার কাঁচিপাত কাটার কাঁচি
পাত ছিদ্র করার পাঞ্চপাত ছিদ্র করার পাঞ্চ
কঠিন কাঠের চাঁইকঠিন কাঠের চাঁই
বৈদ্যুতিক সোল্ডারিং আয়রনবৈদ্যুতিক সোল্ডারিং আয়রন
ফ্লাক্সফ্লাক্স
3

Make the hinged lid

Cut the lid (Fig. 100) 4 1/8 by 4 in; the inner rectangle 3 1/2 by 3 1/2 in leaves 1/4 in to bend up. Cut hinge projections 1/2 in wide by 5/8 in deep with equal spaces, the outer ones only 1/4 in wide. Bend them round a wire 1/16 in thick. Hasluck adds that the teapot may be enamelled dark green.

এই ধাপের উপকরণ:

টিন-মোড়া পাতটিন-মোড়া পাত1 lid
লোহার তারলোহার তার1 1/16 in

প্রয়োজনীয় সরঞ্জাম:

পাত কাটার কাঁচিপাত কাটার কাঁচি
খোঁটাখোঁটা
কাঠের হাতুড়িকাঠের হাতুড়ি

উপকরণ

5

প্রয়োজনীয় সরঞ্জাম

9

এই ব্লুপ্রিন্ট যা তৈরি করে

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...