কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
The Cam-Lever Lemon Squeezer: A Cam on a Shaft Presses the Plunger, Springs Lift It
Martin

তৈরি করেছেন

Martin

30. সেপ্টেম্বর 2026NO
১৭
০
০
০
০

The Cam-Lever Lemon Squeezer: A Cam on a Shaft Presses the Plunger, Springs Lift It

A plunger pressed straight down by the hand needs a strong push to empty a lemon. A. Clarence Weeks of New York received US 165,638, dated 13 July 1875, for a squeezer with a frame on legs over a dish, a perforated bowl in the frame, a plate hinged to one end carrying the plunger, two standards on the frame with a shaft across them carrying "a cam-lever, G, arranged for contact of its face or bearing-surface with the upper side of the board or plate, which carries the plunger", and springs from the plate to the standards. "By the use of the cam-lever an immense power is obtained, and the juice is extracted from the lemon in a more thorough and perfect manner than when the power is applied directly to the plate or bar carrying the plunger." This rung works out the cam's average force, with a work check, then builds the frame, the hinged plate and the cam lever in hardwood and steel, and squeezes lemons with it.
মধ্যবর্তী
About 5 hours

নির্দেশাবলি

1

The cam's force

Jupyter নোটবুক লোড হচ্ছে…
2

A lever press before it

The embedded blueprint presses the lemon with the lever itself. Weeks puts a cam lever over a hinged plate, so a turn of the lever gives a far greater push.
3

Read US 165,638

"Two standards, E E, are attached to the frame A, one on each side, in the upper portions of which standards are bearings for a shaft, f, to which is attached, midway of its length, a cam-lever, G, arranged for contact of its face or bearing-surface with the upper side of the board or plate, which carries the plunger. J is a spring, which may be of rubber or metal, having its lower end attached to the board or plate C, and its upper end attached to the standard E." "When the cam-lever G is depressed its face or bearing-surface presses upon the board or plate C, and forces the plunger into the bowl upon the lemon."
4

Build the squeezer and press lemons

**Frame and bowl.** Make a hardwood board frame on four legs, tall enough for a dish beneath, with a hole in it. Fit a tin-can bowl with a punched base into the hole. **Plate and plunger.** Hinge a hardwood plate to one end of the frame with a butt hinge, and screw a hardwood plunger to its underside so it enters the bowl. **Standards and cam.** Screw two hardwood standards to the frame's sides beside the plate and run a steel rod across between them as the shaft f. Cut a hardwood cam lever with a curved face whose distance from the shaft grows by about 15 mm over 60° of turn, drill it for the shaft, and fix it in the middle of the rod with a pin. **Springs.** Hook two extension springs from the plate to the standards so they lift the plate when the cam is raised. **Test.** Put a half lemon in the bowl over a dish and press the lever down. Compare the juice with a half pressed by pushing the plate down by hand.

এই ধাপের উপকরণ:

শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা2 টুকরা
কঠিন কাঠের চাঁইকঠিন কাঠের চাঁই2 টুকরা
কাঠের খিলকাঠের খিল0.6 মিটার
কাঠের স্ক্রুকাঠের স্ক্রু16 টুকরা
কাঠের আঠাকাঠের আঠা1 টুকরা
টিনের কৌটাটিনের কৌটা1 টুকরা
দরজার কবজাদরজার কবজা1 টুকরা
নরম ইস্পাতের গোল দণ্ডনরম ইস্পাতের গোল দণ্ড0.2 মিটার
পেরেকপেরেক2 টুকরা
টান-স্প্রিংটান-স্প্রিং2 টুকরা
লেবুলেবু3 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাত-করাতহাত-করাত
কাঠের বাটালির সেটকাঠের বাটালির সেট
রুক্ষ রেতিরুক্ষ রেতি
তারবিহীন তুরপুনতারবিহীন তুরপুন
ড্রিল-বিট সেটড্রিল-বিট সেট
পাত কাটার কাঁচিপাত কাটার কাঁচি
হাতুড়িহাতুড়ি
স্ক্রুড্রাইভার সেটস্ক্রুড্রাইভার সেট
হ্যাকসহ্যাকস
রান্নাঘরের ছুরিরান্নাঘরের ছুরি
ডিজিটাল রান্নাঘরের দাঁড়িপাল্লাডিজিটাল রান্নাঘরের দাঁড়িপাল্লা
চামড়ার কাজের দস্তানাচামড়ার কাজের দস্তানা
5

A cam that slips, jams or does not lift

Cam-lever lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**A. Clarence Weeks** of New York, New York, filed US 165,638 on 26 April 1875; it is dated 13 July 1875. His frame A had feet or legs a, the bowl B had perforations b, the plate C was hinged to one end of the frame, and there could be one spring or two. His claim is the frame with the perforated bowl and standards, the pivoted plate with its plunger, the springs, and the shaft with its cam lever. **Honest limits.** Hardwood, a tin bowl and a steel rod stand in for his parts. The notebook gives the average force without friction; its forces, lengths and angles are examples. Your juice is the result.

উপকরণ

11
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • 0.6 মিটার
    প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • 1 টুকরা
    প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • 2 টুকরা
    প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • 3 টুকরা
    প্লেসহোল্ডার

প্রয়োজনীয় সরঞ্জাম

12

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...