কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
The Reusable Can Opener: A Stop on the Knife and a Rim Left to Use Again
YourGrandma

তৈরি করেছেন

YourGrandma

6. অক্টোবর 2026IS
১১
০
০
০
০

The Reusable Can Opener: A Stop on the Knife and a Rim Left to Use Again

A can hacked open is fit only to be thrown away. Richard H. Atwell of Baltimore, Maryland, received US 86,626, dated 9 February 1869, for a can opener: a bar at right angles to a handle that carries a piercer, a hook-shaped fulcrum pin in a hole made at the centre of the piece to be removed, a concave knife in one of several holes, and a stop that limits how far the knife goes in; the edges of the opening are so turned "as to adapt the can to be again used." This rung works out which hole leaves a usable rim, then builds the bar, pin, knife and stop and opens a can cleanly enough to refill.
মধ্যবর্তী
About 3 hours

নির্দেশাবলি

1

Which hole leaves a rim

Jupyter নোটবুক লোড হচ্ছে…
2

A centre-pivot cutter before it

The embedded blueprint cuts a round hole round a spike. Atwell adds a stop on the knife and turns the edge so the can is fit to use again.
3

Read US 86,626

"The edges of the opening made in the can are so turned, by this construction of knife, as to adapt the can to be again used." "A rest or stop, D, preferably cast on the bar, and arranged between the fulcrum a and knife C, limits the insertion of the knife, and thus prevents its hanging in the tin at its shank."
4

Make the bar and handle

Cut 90 mm of 25 × 3 mm flat bar and drill 5 mm holes 20, 28 and 36 mm from one end. Fix its other end at right angles into a hardwood handle with epoxy, and file a point on the handle's far end as the piercer.

এই ধাপের উপকরণ:

নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরা
শক্ত কাঠের গোঁজশক্ত কাঠের গোঁজ1 টুকরা
দুই উপাদানের ইপক্সিদুই উপাদানের ইপক্সি1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হ্যাকসহ্যাকস
কেন্দ্র-ছিদ্রককেন্দ্র-ছিদ্রক
তারবিহীন তুরপুনতারবিহীন তুরপুন
ড্রিল-বিট সেটড্রিল-বিট সেট
রেতি (হাতের রেতি)রেতি (হাতের রেতি)
5

Make the hook pin and stop

Bend 4 mm steel rod into a hook and fix it through the bar's end as the fulcrum pin. Epoxy a hardwood stop under the bar between the pin and the first hole, 4 mm deep.

এই ধাপের উপকরণ:

নরম ইস্পাতের গোল দণ্ডনরম ইস্পাতের গোল দণ্ড1 টুকরা
কঠিন কাঠের চাঁইকঠিন কাঠের চাঁই1 টুকরা
দুই উপাদানের ইপক্সিদুই উপাদানের ইপক্সি1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

বেঞ্চ ভাইসবেঞ্চ ভাইস
হাতুড়িহাতুড়ি
হ্যাকসহ্যাকস
তারবিহীন তুরপুনতারবিহীন তুরপুন
ড্রিল-বিট সেটড্রিল-বিট সেট
6

Make the knife

Cut a knife from 1 mm steel sheet with a 5 mm shank, file its cutting edge concave and its flat side toward the pin. Fit the shank through a hole and nut it on top.

এই ধাপের উপকরণ:

নরম ইস্পাতের পাতনরম ইস্পাতের পাত1 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম1 টুকরা
যন্ত্র-স্ক্রুযন্ত্র-স্ক্রু1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

পাত কাটার কাঁচিপাত কাটার কাঁচি
রেতি (হাতের রেতি)রেতি (হাতের রেতি)
শান দেওয়ার পাথরশান দেওয়ার পাথর
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
স্বচ্ছ নিরাপত্তা-চশমাস্বচ্ছ নিরাপত্তা-চশমা
7

The patent drawing

US 86,626 drawing sheet, public domain (expired patent).
ধাপ 7 - Image 1
8

Open a can for reuse

Pierce the centre of a sealed can's top with the handle's point and hook the pin in. Press the knife through to the stop and turn the bar round once. Measure the rim left and run a finger-safe check along it with a rag.
ধাপ 8 - Image 1

এই ধাপের উপকরণ:

টিনের কৌটাটিনের কৌটা1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

ডিজিটাল ক্যালিপার ৬ ইঞ্চিডিজিটাল ক্যালিপার ৬ ইঞ্চি
স্টপওয়াচস্টপওয়াচ
চামড়ার কাজের দস্তানাচামড়ার কাজের দস্তানা
9

A knife that hangs, wanders or leaves a ragged rim

Reusable can opener troubleshooting.

Flow

Loading...
10

History and honest limits

**Richard H. Atwell** of Baltimore, Maryland, received US 86,626, dated 9 February 1869. His bar may be cast in one piece with the handle or hinged to it; the knife is held from lateral pressure and bending, its edge preferably concave so it need not be pressed down to its work. When the can is not to be refilled, part of the circle may be cut and the piece bent up. **Honest limits.** Epoxy and a hardwood stop stand in for his casting, and the knife is unhardened sheet. Your rim measurements are the result.

উপকরণ

9

প্রয়োজনীয় সরঞ্জাম

14

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...