সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Silver Solder of Silver and Red Copper With a Burnt Wine-Stone Flux (Theophilus, 12th Century)
Forge

তৈরি করেছেন

Forge

14. নভেম্বর 2026NO
৯
০
০
০
০

Silver Solder of Silver and Red Copper With a Burnt Wine-Stone Flux (Theophilus, 12th Century)

How Theophilus soldered silver in the 12th century: an alloy of two parts pure silver and a third part red copper, rasped to filings, laid on a joint painted with a flux of burnt wine-stone (tartar) ground with water and salt, and flowed in the coals with a long gentle blast.
মধ্যবর্তী
About half a day

নির্দেশাবলি

1

The alloy

Jupyter নোটবুক লোড হচ্ছে…
2

Read De Diversis Artibus, Book III

"Weigh two parts of pure silver, and a third (part) of red copper, and mix and finely rasp into a clean vessel."
3

Make the solder

Weigh two parts of pure silver and a third part of red copper, melt them together, and rasp the alloy finely into a clean vessel; keep the filings in a quill.

এই ধাপের উপকরণ:

খাঁটি রুপাখাঁটি রুপা1 টুকরা
তামাতামা1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

সমবাহু দাঁড়িপাল্লাসমবাহু দাঁড়িপাল্লা
মূষা (ক্রুসিবল)মূষা (ক্রুসিবল)
মুচি-চিমটামুচি-চিমটা
কামারের ভাটিকামারের ভাটি
হাপরহাপর
রুক্ষ রেতিরুক্ষ রেতি
পালকের কলমপালকের কলম
4

Make the flux

Take wine-stone from a vessel in which good wine has stood a long time, tie pieces in a cloth and put it in the fire until no more vapour comes from it. When cool, blow off the cloth ash and grind the burnt stone in a copper vessel with a round mallet, mixing in water and salt until it is as thick as lees.

এই ধাপের উপকরণ:

কাঁচা ওয়াইন-পাথর (আর্গল)কাঁচা ওয়াইন-পাথর (আর্গল)1 টুকরা
সুতির কাপড়সুতির কাপড়1 টুকরা
লবণলবণ1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
২০ লিটারের বালতি২০ লিটারের বালতি
কাঠের হাতুড়িকাঠের হাতুড়ি
5

Solder

With a thin piece of wood paint the flux round the joint inside and out, shake the filed solder over it with a small iron, and dry it. Paint more flux on, more thickly than before, put the work in the fire, cover it with coals and blow gently with a long breath until the solder has melted. Take it out, let it cool slightly and wash it. If the joint is not firm, do it again. Then file and scrape it smooth.

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
হাপরহাপর
মুচি-চিমটামুচি-চিমটা
রেতি (হাতের রেতি)রেতি (হাতের রেতি)
6

Troubleshooting

Soldering troubleshooting.

Flow

Loading...
7

History and honest limits

From Theophilus, **De Diversis Artibus**, Book III, chapter XXXI, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 241-243). "A third (part)" can be read two ways; both are shown. Melting the alloy before rasping, the tools and the diagram are ours.

উপকরণ

5
  • প্লেসহোল্ডার
  • 1 টুকরা
    প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • 1 টুকরা
    প্লেসহোল্ডার

প্রয়োজনীয় সরঞ্জাম

10

এই ব্লুপ্রিন্ট যা তৈরি করে

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...