কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Metal Oxide Varistor: Zinc Oxide with 0.2 % Bismuth Oxide, 750 °C, 1.0 mm (Masuyama 1972)
A non-linear resistor: the current through it rises far faster than the voltage across it. Masuyama, Matsuoka and Nishi made one from zinc oxide with a little bismuth oxide: pressed into a disc, sintered, lapped, and given metal electrodes. With 0.2 mole % bismuth oxide, sintered at 750 °C and lapped to 1.0 mm, the disc measured a C-value of 200 at 1 mA and a nonlinearity exponent n of 1.8.
Source: T. Masuyama, M. Matsuoka and T. Nishi (Matsushita), US 3,663,458 (1972), Example 1. Unknown: how the aluminium is sprayed on and what the silver paint is. The patent calls both well known, so they are linked to unknown heads. The 10 g batch is our arithmetic. Picture: the patent's drawing.
উন্নত
1 day
নির্দেশাবলি
1
1
Weigh 99.8 : 0.2 and wet-mill 5 hours
Weigh 99.8 : 0.2 and wet-mill 5 hours
Mix zinc oxide and bismuth oxide 99.8 : 0.2 by moles. Ours, for 10 g: 9.887 g zinc oxide, 0.113 g bismuth oxide (our arithmetic). Mill wet for 5 hours, then dry. Unknown: the milling liquid.
এই ধাপের উপকরণ:
জিংক অক্সাইড পাউডার9.887 গ্রা
বিসমাথ অক্সাইড0.113 গ্রাপ্রয়োজনীয় সরঞ্জাম:
সমবাহু দাঁড়িপাল্লা
লোহার বল মিল
শুকানোর চুল্লি2
2
Press discs 13 mm by 2.5 mm
Press discs 13 mm by 2.5 mm
Press the powder in a mould into discs 13 mm across and 2.5 mm thick at 340 kg/cm².
প্রয়োজনীয় সরঞ্জাম:
হাইড্রলিক প্রেস
ডিস্ক চাপার ডাই
ভার্নিয়ার ক্যালিপার3
3
Sinter 1 hour at 750 °C and furnace-cool
Sinter 1 hour at 750 °C and furnace-cool
Sinter the discs in air for 1 hour at 750 °C, then let them cool in the furnace to room temperature (about 15-30 °C). Masuyama gives 800 to 1200 °C as the best range for zinc oxide with bismuth oxide.
প্রয়োজনীয় সরঞ্জাম:
মাফল চুল্লি4
4
Lap both faces to 1.0 mm
Lap both faces to 1.0 mm
Lap both faces with 600-mesh silicon carbide until the disc is 1.0 mm thick.
প্রয়োজনীয় সরঞ্জাম:
ভার্নিয়ার ক্যালিপার5
5
Spray aluminium electrodes and attach leads
Spray aluminium electrodes and attach leads
Spray a metallised film of aluminium on both faces. Attach a lead wire to each with conductive silver paint. Unknown: the spraying method and the paint.
এই ধাপের উপকরণ:
অ্যালুমিনিয়ামের পিণ্ড1 as required
রুপোর পরিবাহী রং1 as required
তামার তার2 টুকরাপ্রয়োজনীয় সরঞ্জাম:
ধাতু স্প্রে করার অজানা পদ্ধতি
ভার্নিয়ার ক্যালিপারউপকরণ
5- 9.887 গ্রাপ্লেসহোল্ডার
- 0.113 গ্রাপ্লেসহোল্ডার
- 1 as requiredপ্লেসহোল্ডার
- 1 as requiredপ্লেসহোল্ডার
- 2 টুকরাপ্লেসহোল্ডার
প্রয়োজনীয় সরঞ্জাম
9- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

