সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Metal Oxide Varistor: Zinc Oxide with Bismuth, Manganese and Antimony Oxides, 1350 °C (Masuyama 1972, Ex. 3)
Masuyama, Matsuoka and Nishi found that adding two more oxides to zinc oxide and bismuth oxide gives excellent non-linear properties. This is their Example 3 with manganese dioxide and antimony trioxide: 98.5 % zinc oxide and 0.5 % each of bismuth oxide, manganese dioxide and antimony trioxide by moles, sintered at 1350 °C. The disc measured a C-value of 150 at 1 mA and a nonlinearity exponent n of 27.4.
Source: T. Masuyama, M. Matsuoka and T. Nishi (Matsushita), US 3,663,458 (1972), Example 3. Unknown: what the silver paint is. The spraying is ours, after US Army Corps of Engineers EM 1110-2-3401 (1999). The 10 g batch is our arithmetic. Picture: the patent's drawing.
উন্নত
1 day
নির্দেশাবলি
1
1
Weigh 98.5 : 0.5 : 0.5 : 0.5 and wet-mill 5 hours
Weigh 98.5 : 0.5 : 0.5 : 0.5 and wet-mill 5 hours
Mix zinc oxide, bismuth oxide, manganese dioxide and antimony trioxide 98.5 : 0.5 : 0.5 : 0.5 by moles. Ours, for 10 g: 9.5 g zinc oxide, 0.276 g bismuth oxide, 0.052 g manganese dioxide, 0.173 g antimony trioxide (our arithmetic). Mill wet for 5 hours, then dry. Unknown: the milling liquid.
এই ধাপের উপকরণ:
জিংক অক্সাইড পাউডার9.5 গ্রা
বিসমাথ অক্সাইড0.276 গ্রা
ম্যাঙ্গানিজ ডাই অক্সাইড (পাইরোলুসাইট)0.052 গ্রা
অ্যান্টিমনি ট্রাইঅক্সাইড0.173 গ্রাপ্রয়োজনীয় সরঞ্জাম:
সমবাহু দাঁড়িপাল্লা
লোহার বল মিল
শুকানোর চুল্লি2
2
Press discs 13 mm by 2.5 mm
Press discs 13 mm by 2.5 mm
Press the powder in a mould into discs 13 mm across and 2.5 mm thick at 340 kg/cm², as in Example 1.
প্রয়োজনীয় সরঞ্জাম:
হাইড্রলিক প্রেস
ডিস্ক চাপার ডাই
ভার্নিয়ার ক্যালিপার3
3
Sinter 1 hour at 1350 °C and furnace-cool
Sinter 1 hour at 1350 °C and furnace-cool
Sinter the discs in air for 1 hour at 1350 °C, then let them cool in the furnace to room temperature (about 15-30 °C).
প্রয়োজনীয় সরঞ্জাম:
মাফল চুল্লি4
4
Lap to 10 mm by 1.5 mm
Lap to 10 mm by 1.5 mm
Lap both faces with 600-mesh silicon carbide. The finished disc is 10 mm across and 1.5 mm thick.
প্রয়োজনীয় সরঞ্জাম:
ভার্নিয়ার ক্যালিপার5
5
Spray aluminium electrodes and attach leads
Spray aluminium electrodes and attach leads
Spray a metallised film of aluminium on both faces. Attach a lead wire to each with conductive silver paint. Ours, after US Army Corps of Engineers EM 1110-2-3401 (1999): wire-arc spray the aluminium from two 3.2 mm wires melted by an 18-40 V DC arc and atomised by compressed air, 15-20 cm from the disc and never at less than 45°, in at least two coats at right angles of 50-75 µm each. Unknown: the paint.
এই ধাপের উপকরণ:
অ্যালুমিনিয়ামের পিণ্ড1 as 3.2 mm spray wire
রুপোর পরিবাহী রং1 as required
তামার তার2 টুকরাপ্রয়োজনীয় সরঞ্জাম:
ভার্নিয়ার ক্যালিপার
তার-আর্ক স্প্রে গান
শিল্প বায়ু সংনামকউপকরণ
7- 9.5 গ্রাপ্লেসহোল্ডার
- 0.276 গ্রাপ্লেসহোল্ডার
- 0.052 গ্রাপ্লেসহোল্ডার
- 0.173 গ্রাপ্লেসহোল্ডার
- 1 as 3.2 mm spray wireপ্লেসহোল্ডার
- 1 as requiredপ্লেসহোল্ডার
- 2 টুকরাপ্লেসহোল্ডার
প্রয়োজনীয় সরঞ্জাম
10- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।


