སྒྱུ་རྩལ
མཛེས་སྡུག་དང་བདེ་ཐང
བཟོ་རིག
རིག་གནས་དང་ལོ་རྒྱུས
དགའ་སྟོན
ཁོར་ཡུག
ཟས་དང་བཏུང་རྫས
ཕྱིར་འཕྲུལ་རིག
ཚན་རིག
རྩེད་འགྲན
རིག་རྩལ
གྱོན་རུང
Carbon Resistance Strip: Carbon and Phenolic Resin in Acetone, Cured on Semi-Cured Phenolic Sheet
Ed

བཟོས་མཁན

Ed

21. སྤྱི་ཟླ་བཅུ་པ 2026FI
༡༩
༠
༠
༠
༠

Carbon Resistance Strip: Carbon and Phenolic Resin in Acetone, Cured on Semi-Cured Phenolic Sheet

Podolsky (Wirt Company, US 2,060,114, 1936) bonded the carbon film into its base: the phenolic sheet is only half cured, the coating carries the same kind of resin, and its solvent (acetone) softens the sheet's surface. Heated calender rolls then finish the cure of sheet and coating together, so the track is hard, does not rub off and lasts. Cut across, the sheet gives resistance strips for a variable resistor. The picture: our diagram.
བར་མ
1 day

ལམ་སྟོན

1

Mix 21 carbon, 26 resin, 53 solvent

Make a solution of 21 % carbon, 26 % phenol-formaldehyde resin and 53 % acetone. The patent says the exact proportions are not essential; this is its example.

གོམ་པ་འདིའི་རྫས་རིགས:

ཀར་བོན།ཀར་བོན།21 parts
ཆུ་ཚོད་བེ་ཀེ་ལའིཊ (ཕི་ནོལ་དང་ཕོར་མཱལ་ཌི་ཧའིཌ་བསྡུས་འབྲས)ཆུ་ཚོད་བེ་ཀེ་ལའིཊ (ཕི་ནོལ་དང་ཕོར་མཱལ་ཌི་ཧའིཌ་བསྡུས་འབྲས)26 parts

ལག་ཆས་དགོས་མཁོ:

ཨེ་སི་ཊོན།ཨེ་སི་ཊོན།
ལག་པ་འདྲ་མཉམ་གྱི་སྲང་།ལག་པ་འདྲ་མཉམ་གྱི་སྲང་།
ཤེལ་གྱི་བི་ཀར།ཤེལ་གྱི་བི་ཀར།
དཀྲུག་ཆས་དཀྲུག་ཆས་
གདོང་ཁེབས་ཧྲིལ་བུའི་དབུགས་ལེན་ཆས།གདོང་ཁེབས་ཧྲིལ་བུའི་དབུགས་ལེན་ཆས།
ལ་སྟིག་གི་ལག་ཤུབས།ལ་སྟིག་གི་ལག་ཤུབས།
2

Coat the semi-cured sheet

Use a phenolic sheet whose cure was stopped before it fully hardened. A roller turning in a pan of the solution coats its underside.

གོམ་པ་འདིའི་རྫས་རིགས:

ཕྱེད་ཀ་སྲ་བཟོ་ཡོད་པའི་ཕི་ནོ་ལིཀ་ཤོག་ལེབ།ཕྱེད་ཀ་སྲ་བཟོ་ཡོད་པའི་ཕི་ནོ་ལིཀ་ཤོག་ལེབ།1 དུམ་བུ།

ལག་ཆས་དགོས་མཁོ:

བཅུག་ཏེ་བཀྱག་པའི་འཁོར་ལོ་ཟུངབཅུག་ཏེ་བཀྱག་པའི་འཁོར་ལོ་ཟུང
གདོང་ཁེབས་ཧྲིལ་བུའི་དབུགས་ལེན་ཆས།གདོང་ཁེབས་ཧྲིལ་བུའི་དབུགས་ལེན་ཆས།
ལ་སྟིག་གི་ལག་ཤུབས།ལ་སྟིག་གི་ལག་ཤུབས།
3

Cure between calender rolls at 350 °F

Pass the coated sheet between calender rolls heated to about 350 °F (177 °C). This finishes the cure and bonds the coating to the sheet. The patent sometimes calenders it again to burnish the surface.

ལག་ཆས་དགོས་མཁོ:

དྲོད་བསྣན་པའི་ཀེ་ལེན་ཌར་རོལདྲོད་བསྣན་པའི་ཀེ་ལེན་ཌར་རོལ
ཚ་བཟོད་ཀྱི་ལག་ཤུབས།ཚ་བཟོད་ཀྱི་ལག་ཤུབས།
4

Cut into strips

Cut the sheet across into strips of the width wanted. Ours: tin snips.

ལག་ཆས་དགོས་མཁོ:

ལྕགས་ལེབ་གཏུབ་ནིའི་ཇེམ་ཙི།ལྕགས་ལེབ་གཏུབ་ནིའི་ཇེམ་ཙི།
ལ་སྟིག་གི་ལག་ཤུབས།ལ་སྟིག་གི་ལག་ཤུབས།

རྫས་རིགས

3

ལག་ཆས་དགོས་མཁོ

10

བིལུ་པིརིན་ཊི་འདི་གིས་བཟོ་མི

འབྲེལ་ཡོད་བིལུ་པིརིན་ཊི

བིལུ་པིརིན་ཊི་འདི་ཚུ་ཐབས་ལམ་དང་རྫས་རིགས། སྤྱི་ཆོས་བགོ་བཤའ་བྱེད

CC0 སྤྱི་དབང

བིལུ་པིརིན་ཊི་འདི་CC0 འོག་བཀྲམས་ཡོད། ཁྱེད་རང་གིས་ཆོག་མཆན་མ་བཞེས་པར་ཕབ་ལེན་དང་བཟོ་བཅོས། བགོ་བཤའ། དགོས་མཁོ་གང་ལའང་བཀོལ་སྤྱོད་བྱས་ཆོག

བཟོ་མཁན་ལ་རྒྱབ་སྐྱོར་བྱེད་པའི་ཆེད་ཁོང་ཚོའི་བིལུ་པིརིན་ཊི་བརྒྱུད་ཐོན་སྐྱེད་ཉོ། བཟོ་མཁན་གྱིས བཟོ་མཁན་གྱི་ཁེ་ཕོགས ཚོང་པས་གཏན་འཁེལ་བྱས་པ། ཡང་ན་བིལུ་པིརིན་ཊི་འདིའི་པར་གསར་བཟོས་ཏེ་ཁྱེད་རང་གི་བིལུ་པིརིན་ཊི་ནང་མཐུད་སྦྲེལ་བྱས་ཏེ་ཡོང་སྒོ་བགོ་བཤའ་བྱེད།

གྲོས་བསྡུར

(0)

ནང་འཛུལ གྲོས་བསྡུར་ནང་མཉམ་ཞུགས་ཆེད

བསམ་ཚུལ་ཚུ་ཐོབ་བཞིན...