སྒྱུ་རྩལ
མཛེས་སྡུག་དང་བདེ་ཐང
བཟོ་རིག
རིག་གནས་དང་ལོ་རྒྱུས
དགའ་སྟོན
ཁོར་ཡུག
ཟས་དང་བཏུང་རྫས
ཕྱིར་འཕྲུལ་རིག
ཚན་རིག
རྩེད་འགྲན
རིག་རྩལ
གྱོན་རུང

Phthalic Anhydride by Air Oxidation of Naphthalene: Gibbs and Conover, 1918
Harry D. Gibbs and Courtney Conover patented this in 1918, US 1,285,117 (filed 1917), and dedicated it to the public. Phthalic anhydride had been made by oxidising naphthalene with sulphuric acid in the presence of mercury sulphate; they used air instead. Naphthalene vapour mixed with plenty of air is passed over finely divided oxides of vanadium at 350–550 °C, and the phthalic anhydride formed is condensed and separated by fractional sublimation.
མཐོ་རིམ
Works process
ལམ་སྟོན
1
1
Melt and vaporise the naphthalene
Melt and vaporise the naphthalene
Melt the naphthalene and let it flow continuously, at a measured rate, into a heated chamber where it is volatilised.
གོམ་པ་འདིའི་རྫས་རིགས:
ནེབ་ཐ་ལིན།1 as requiredལག་ཆས་དགོས་མཁོ:
བླུགས་ལྕགས་ཀྱི་ཞུ་སྣོད།
རླངས་པར་བསྒྱུར་སའི་ཁང་མིག།
ཚ་ཚད་འཇལ་ཆས།2
2
Mix the vapour with air
Mix the vapour with air
Mix the naphthalene vapour with air in excess of the amount needed to oxidise it to phthalic anhydride, preferably at least four times the amount theoretically required.
ལག་ཆས་དགོས་མཁོ:
རླུང་འཕུ་འཕྲུལ་ཆས།
རླངས་པར་བསྒྱུར་སའི་ཁང་མིག།3
3
Pass it over vanadium oxide at 350–550 °C
Pass it over vanadium oxide at 350–550 °C
Pass the mixture into a reaction chamber kept at 350–550 °C, preferably 500 °C. There it is forced into close contact with oxides of vanadium in the form of a fine powder, supported on trays, with baffle plates forcing the gas current through it. Keep the gases under pressure only sufficient to make them flow continuously through the chamber. The naphthalene is oxidised to phthalic anhydride, with carbon dioxide and water.
ལག་ཆས་དགོས་མཁོ:
སྡེར་ཅན་ཀེ་ཊ་ལིསཊ་ཁང་མིག།
བ་ན་ཌི་ཡམ་ཨོག་སཱའིཌ།
པཱའི་རོ་མི་ཊར
རླུང་འཕུ་འཕྲུལ་ཆས།4
4
Condense the products
Condense the products
Condense the products of the reaction, phthalic anhydride with small portions of other oxidation products of naphthalene, together with the unchanged naphthalene.
ལག་ཆས་དགོས་མཁོ:
རླངས་པ་འཁྱགས་སའི་ཁང་མིག།5
5
Separate by fractional sublimation
Separate by fractional sublimation
Separate the phthalic anhydride from the other oxidation products and the unchanged naphthalene by fractional sublimation.
ལག་ཆས་དགོས་མཁོ:
ཐད་ཀར་རླངས་པར་འགྱུར་བའི་ཡོ་བྱད།
ཚ་ཚད་འཇལ་ཆས།6
6
How much air
How much air
Jupyter ཚང་དེབ་མངོན་གསལ་འབད་དོ་…
རྫས་རིགས
1- 1 as requiredས་ཆ་འཛིན
ལག་ཆས་དགོས་མཁོ
9- ས་ཆ་འཛིན
- ས་ཆ་འཛིན
- ས་ཆ་འཛིན
- ས་ཆ་འཛིན
- ས་ཆ་འཛིན
- ས་ཆ་འཛིན
- ས་ཆ་འཛིན
- ས་ཆ་འཛིན
- ས་ཆ་འཛིན
བིལུ་པིརིན་ཊི་འདི་གིས་བཟོ་མི
འབྲེལ་ཡོད་བིལུ་པིརིན་ཊི
བིལུ་པིརིན་ཊི་འདི་ཚུ་ཐབས་ལམ་དང་རྫས་རིགས། སྤྱི་ཆོས་བགོ་བཤའ་བྱེད
CC0 སྤྱི་དབང
བིལུ་པིརིན་ཊི་འདི་CC0 འོག་བཀྲམས་ཡོད། ཁྱེད་རང་གིས་ཆོག་མཆན་མ་བཞེས་པར་ཕབ་ལེན་དང་བཟོ་བཅོས། བགོ་བཤའ། དགོས་མཁོ་གང་ལའང་བཀོལ་སྤྱོད་བྱས་ཆོག
བཟོ་མཁན་ལ་རྒྱབ་སྐྱོར་བྱེད་པའི་ཆེད་ཁོང་ཚོའི་བིལུ་པིརིན་ཊི་བརྒྱུད་ཐོན་སྐྱེད་ཉོ། བཟོ་མཁན་གྱིས བཟོ་མཁན་གྱི་ཁེ་ཕོགས ཚོང་པས་གཏན་འཁེལ་བྱས་པ། ཡང་ན་བིལུ་པིརིན་ཊི་འདིའི་པར་གསར་བཟོས་ཏེ་ཁྱེད་རང་གི་བིལུ་པིརིན་ཊི་ནང་མཐུད་སྦྲེལ་བྱས་ཏེ་ཡོང་སྒོ་བགོ་བཤའ་བྱེད།

