སྒྱུ་རྩལ
མཛེས་སྡུག་དང་བདེ་ཐང
བཟོ་རིག
རིག་གནས་དང་ལོ་རྒྱུས
དགའ་སྟོན
ཁོར་ཡུག
ཟས་དང་བཏུང་རྫས
ལྗང་མ་འཇོར་ལུགས
ཕྱིར་འཕྲུལ་རིག
ཚན་རིག
རྩེད་འགྲན
རིག་རྩལ
གྱོན་རུང
Building a Reed Bundle Raft — Buoyant Watercraft from Wetland Plants
Woody

བཟོས་མཁན

Woody

25. སྤྱི་ཟླ་ལྔ་པ 2026NO

Building a Reed Bundle Raft — Buoyant Watercraft from Wetland Plants

The reed bundle raft is one of the oldest watercraft designs, used by cultures worldwide wherever large reeds or bulrushes grow near water. The totora reed boats of Lake Titicaca, the papyrus boats of ancient Egypt, and the tule balsa rafts of Native California all use the same principle: bundles of dried reeds lashed tightly together contain enough trapped air to support a person's weight. Reeds are naturally buoyant because their stems are filled with a spongy aerenchyma tissue. A well-built reed raft can carry 200-400 kg depending on size. The craft is simple to build, requires no metal tools, and the materials grow abundantly in any wetland. The main limitation is lifespan — waterlogged reeds eventually lose buoyancy after 2-4 weeks of continuous use.
བར་མ
4-6 hours

ལམ་སྟོན

1

Harvest Reeds

Harvest large quantities of bulrush, cattail, or tule reeds — each stalk should be 2+ metres long.

གོམ་པ་འདིའི་རྫས་རིགས:

Dried ReedDried Reed100 piece
2

Dry the Reeds

Spread the reeds on dry ground and let them dry for 1-2 weeks until they feel light and stiff.
3

Sort by Length

Sort dried reeds by length into matching groups.
4

Form the First Bundle

Form the first bundle: gather a tight armload of reeds (30-40cm diameter) and bind at 3-4 points along its length with strong cordage.

གོམ་པ་འདིའི་རྫས་རིགས:

CordageCordage5 piece
5

Taper Both Ends

Taper both ends of the bundle by using progressively shorter reeds at the outsides — this creates a pointed bow and stern.
6

Make a Second Bundle

Make a second identical bundle.
7

Lash the Bundles Together

Lash the two bundles side by side with cross-lashings every 30-40cm, pulling the bundles as tight as possible.
8

Check the Width

The raft should be wider than the paddler's hips (80-120cm total width).
9

Optional: Add a Deck Bundle

Optional: add a third smaller bundle on top between the two main bundles to create a raised deck.
10

Prepare a Paddle

Tie a paddle or pole before launching.
11

Test in Shallow Water

Test in shallow water first — the raft should sit with the top surface above waterline with the paddler aboard.
12

Store Out of Water

Keep the raft stored out of water when not in use to extend lifespan.

རྫས་རིགས

2

མཐུད་སྦྲེལ་བིལུ་པིརིན་ཊི་རྫས་རིགས

འབྲེལ་ཡོད་བིལུ་པིརིན་ཊི

བིལུ་པིརིན་ཊི་འདི་ཚུ་ཐབས་ལམ་དང་རྫས་རིགས། སྤྱི་ཆོས་བགོ་བཤའ་བྱེད

CC0 སྤྱི་དབང

བིལུ་པིརིན་ཊི་འདི་CC0 འོག་བཀྲམས་ཡོད། ཁྱེད་རང་གིས་ཆོག་མཆན་མ་བཞེས་པར་ཕབ་ལེན་དང་བཟོ་བཅོས། བགོ་བཤའ། དགོས་མཁོ་གང་ལའང་བཀོལ་སྤྱོད་བྱས་ཆོག

བཟོ་མཁན་ལ་རྒྱབ་སྐྱོར་བྱེད་པའི་ཆེད་ཁོང་ཚོའི་བིལུ་པིརིན་ཊི་བརྒྱུད་ཐོན་སྐྱེད་ཉོ། བཟོ་མཁན་གྱིས བཟོ་མཁན་གྱི་ཁེ་ཕོགས ཚོང་པས་གཏན་འཁེལ་བྱས་པ། ཡང་ན་བིལུ་པིརིན་ཊི་འདིའི་པར་གསར་བཟོས་ཏེ་ཁྱེད་རང་གི་བིལུ་པིརིན་ཊི་ནང་མཐུད་སྦྲེལ་བྱས་ཏེ་ཡོང་སྒོ་བགོ་བཤའ་བྱེད།

གྲོས་བསྡུར

(0)

ནང་འཛུལ གྲོས་བསྡུར་ནང་མཉམ་ཞུགས་ཆེད

བསམ་ཚུལ་ཚུ་ཐོབ་བཞིན...