སྒྱུ་རྩལ
མཛེས་སྡུག་དང་བདེ་ཐང
བཟོ་རིག
རིག་གནས་དང་ལོ་རྒྱུས
དགའ་སྟོན
ཁོར་ཡུག
ཟས་དང་བཏུང་རྫས
ཕྱིར་འཕྲུལ་རིག
ཚན་རིག
རྩེད་འགྲན
རིག་རྩལ
གྱོན་རུང
Slotted Machine Screws Turned from Round Bar
Forge

བཟོས་མཁན

Forge

11. སྤྱི་ཟླ་བཅུ་པ 2026NO
༣༨
༠
༠
༠
༠

Slotted Machine Screws Turned from Round Bar

Small machine screws with a slotted cheese head are turned from round bar: the head is the bar's own diameter, the shank is turned down and threaded, and a slot is sawn across the head. The example is M4 to ISO 1207: head 7 mm across and 2.6 mm high, slot 1.2 mm wide and at least 1.1 mm deep.
བར་མ
15 minutes per screw

ལམ་སྟོན

1

Turn the head diameter

Chuck mild steel round bar and turn the end to 7 mm for a length of 20 mm more than the screw.

གོམ་པ་འདིའི་རྫས་རིགས:

ལྕགས་འཇམ་གྱི་ལྕགས་ཕྲེང་སྒོར་སྒོརམ།ལྕགས་འཇམ་གྱི་ལྕགས་ཕྲེང་སྒོར་སྒོརམ།0.2 མི་ཊར།
གཏུབ་སྣུམ།གཏུབ་སྣུམ།5 ml

ལག་ཆས་དགོས་མཁོ:

ལྕགས་ཀྱི་འཁྲུལ་འཁོར།ལྕགས་ཀྱི་འཁྲུལ་འཁོར།
ལག་པ་གསུམ་ཡོད་པའི་འཁོར་ལོའི་འཛིན་ཆས།ལག་པ་གསུམ་ཡོད་པའི་འཁོར་ལོའི་འཛིན་ཆས།
འཁོར་འཕྲུལ་ལག་ཆས་ཆ་ཚང་། (HSS)འཁོར་འཕྲུལ་ལག་ཆས་ཆ་ཚང་། (HSS)
ཨང་རྟགས་ཚད་འཇལ་ཆས་ ཨིནཅི 6ཨང་རྟགས་ཚད་འཇལ་ཆས་ ཨིནཅི 6
ཉེན་སྲུང་མིག་ཤེལ།ཉེན་སྲུང་མིག་ཤེལ།
2

Turn the shank

Turn the shank a little under 4 mm, leaving 2.6 mm of head plus the parting width. Chamfer the end.

ལག་ཆས་དགོས་མཁོ:

འཁོར་འཕྲུལ་ལག་ཆས་ཆ་ཚང་། (HSS)འཁོར་འཕྲུལ་ལག་ཆས་ཆ་ཚང་། (HSS)
ཨང་རྟགས་ཚད་འཇལ་ཆས་ ཨིནཅི 6ཨང་རྟགས་ཚད་འཇལ་ཆས་ ཨིནཅི 6
3

Thread M4

With the lathe off, cut the M4 x 0.7 thread with the die and oil.

གོམ་པ་འདིའི་རྫས་རིགས:

གཏུབ་སྣུམ།གཏུབ་སྣུམ།2 ml

ལག་ཆས་དགོས་མཁོ:

སྐུད་རིས་གཏུབ་ཆས་ཆ་ཚང་།སྐུད་རིས་གཏུབ་ཆས་ཆ་ཚང་།
ཕྱིའི་སྐུད་རིས་འཛིན་ཆས།ཕྱིའི་སྐུད་རིས་འཛིན་ཆས།
4

Part off

Part the screw off 2.6 mm behind the shank shoulder and round the head's edge with a file.

ལག་ཆས་དགོས་མཁོ:

གཏུབ་ནིའི་གཟོང (འཁོར་ལོའི་འཕྲུལ་ཆས)གཏུབ་ནིའི་གཟོང (འཁོར་ལོའི་འཕྲུལ་ཆས)
དར་མའི་ཚོགས་ཆས།དར་མའི་ཚོགས་ཆས།
5

Saw the slot

Hold the screw in soft vise jaws and saw a slot straight across the head, 1.2 mm wide and at least 1.1 mm deep. Deburr it.

ལག་ཆས་དགོས་མཁོ:

ལྕགས་གཏུབ་སོག་ལེ།ལྕགས་གཏུབ་སོག་ལེ།
ལས་ཅོག་གི་འཛིན་ཆས།ལས་ཅོག་གི་འཛིན་ཆས།
དར་མའི་ཚོགས་ཆས།དར་མའི་ཚོགས་ཆས།
ཨང་རྟགས་ཚད་འཇལ་ཆས་ ཨིནཅི 6ཨང་རྟགས་ཚད་འཇལ་ཆས་ ཨིནཅི 6
6

Troubleshooting

Machine screw troubleshooting.

Flow

Loading...

རྫས་རིགས

2

ལག་ཆས་དགོས་མཁོ

11

བིལུ་པིརིན་ཊི་འདི་གིས་བཟོ་མི

འབྲེལ་ཡོད་བིལུ་པིརིན་ཊི

བིལུ་པིརིན་ཊི་འདི་ཚུ་ཐབས་ལམ་དང་རྫས་རིགས། སྤྱི་ཆོས་བགོ་བཤའ་བྱེད

CC0 སྤྱི་དབང

བིལུ་པིརིན་ཊི་འདི་CC0 འོག་བཀྲམས་ཡོད། ཁྱེད་རང་གིས་ཆོག་མཆན་མ་བཞེས་པར་ཕབ་ལེན་དང་བཟོ་བཅོས། བགོ་བཤའ། དགོས་མཁོ་གང་ལའང་བཀོལ་སྤྱོད་བྱས་ཆོག

བཟོ་མཁན་ལ་རྒྱབ་སྐྱོར་བྱེད་པའི་ཆེད་ཁོང་ཚོའི་བིལུ་པིརིན་ཊི་བརྒྱུད་ཐོན་སྐྱེད་ཉོ། བཟོ་མཁན་གྱིས བཟོ་མཁན་གྱི་ཁེ་ཕོགས ཚོང་པས་གཏན་འཁེལ་བྱས་པ། ཡང་ན་བིལུ་པིརིན་ཊི་འདིའི་པར་གསར་བཟོས་ཏེ་ཁྱེད་རང་གི་བིལུ་པིརིན་ཊི་ནང་མཐུད་སྦྲེལ་བྱས་ཏེ་ཡོང་སྒོ་བགོ་བཤའ་བྱེད།

གྲོས་བསྡུར

(0)

ནང་འཛུལ གྲོས་བསྡུར་ནང་མཉམ་ཞུགས་ཆེད

བསམ་ཚུལ་ཚུ་ཐོབ་བཞིན...