སྒྱུ་རྩལ
མཛེས་སྡུག་དང་བདེ་ཐང
བཟོ་རིག
རིག་གནས་དང་ལོ་རྒྱུས
དགའ་སྟོན
ཁོར་ཡུག
ཟས་དང་བཏུང་རྫས
ཕྱིར་འཕྲུལ་རིག
ཚན་རིག
རྩེད་འགྲན
རིག་རྩལ
གྱོན་རུང
Metal Oxide Varistor: Zinc Oxide with 0.5 % Chromic Oxide, Bismuth-Manganese Oxide Paste Fired On (Masuyama 1972, Ex. 7)
Ed

བཟོས་མཁན

Ed

28. སྤྱི་ཟླ་བཅུ་པ 2026FI
༥
༠
༠
༠
༠

Metal Oxide Varistor: Zinc Oxide with 0.5 % Chromic Oxide, Bismuth-Manganese Oxide Paste Fired On (Masuyama 1972, Ex. 7)

A varistor whose bismuth oxide and manganese dioxide are both fired on from a paste: 99.5 % zinc oxide with 0.5 % chromic oxide by moles, sintered at 1350 °C, coated with a 70 : 30 bismuth oxide and manganese dioxide paste and fired at 800 °C. The disc measured a C-value of 167 at 1 mA and a nonlinearity exponent n of 34.2. Source: T. Masuyama, M. Matsuoka and T. Nishi (Matsushita), US 3,663,458 (1972), Example 7. Unknown: how the aluminium is sprayed on, what the silver paint is, and how strong the epoxy solution of the paste is. The 10 g batch is our arithmetic. Picture: the patent's drawing.
མཐོ་རིམ
2 days

ལམ་སྟོན

1

Weigh 99.5 : 0.5 and wet-mill 5 hours

Mix zinc oxide and chromic oxide 99.5 : 0.5 by moles. Ours, for 10 g: 9.907 g zinc oxide, 0.093 g chromic oxide (our arithmetic). Mill wet for 5 hours, then dry, as in Example 1. Unknown: the milling liquid.

གོམ་པ་འདིའི་རྫས་རིགས:

ཟིངཀ་ཨོག་སའིཌ་ཕུད་རྡུལཟིངཀ་ཨོག་སའིཌ་ཕུད་རྡུལ9.907 g
ཀྲོ་མིཀ་ཨོཀ་སཱའིཌ།ཀྲོ་མིཀ་ཨོཀ་སཱའིཌ།0.093 g

ལག་ཆས་དགོས་མཁོ:

ལག་པ་འདྲ་མཉམ་གྱི་སྲང་།ལག་པ་འདྲ་མཉམ་གྱི་སྲང་།
ལྕགས་ཀྱི་ལྡེ་གུ་འཚོག་འཁོར་ལོལྕགས་ཀྱི་ལྡེ་གུ་འཚོག་འཁོར་ལོ
སྐམ་ནིའི་ཐབསྐམ་ནིའི་ཐབ
2

Press discs 13 mm by 2.5 mm

Press discs 13 mm across and 2.5 mm thick at 340 kg/cm², as in Example 1.

ལག་ཆས་དགོས་མཁོ:

ཧའི་ཌོ་ལིཀ་ནོན་འཕྲུལ།ཧའི་ཌོ་ལིཀ་ནོན་འཕྲུལ།
སྡེར་ཆས་ནན་བཙིར་གྱི་ དཔེ་ཚད།སྡེར་ཆས་ནན་བཙིར་གྱི་ དཔེ་ཚད།
བར་ནི་ཡར་གྱི་འཇལ་ཆས།བར་ནི་ཡར་གྱི་འཇལ་ཆས།
3

Sinter 1 hour at 1350 °C and furnace-cool

Sinter in air at 1350 °C for 1 hour and let the discs cool in the furnace.

ལག་ཆས་དགོས་མཁོ:

མཱཕལ་ཐབམཱཕལ་ཐབ
4

Lap both faces

Lap both faces with silicon carbide abrasive. Example 7 gives no thickness.

ལག་ཆས་དགོས་མཁོ:

སི་ལི་ཀོན་ཀར་བའིཌི་གི་སོ།སི་ལི་ཀོན་ཀར་བའིཌི་གི་སོ།
བར་ནི་ཡར་གྱི་འཇལ་ཆས།བར་ནི་ཡར་གྱི་འཇལ་ཆས།
5

Coat with bismuth and manganese oxide paste, fire at 800 °C

Coat both lapped faces with a paste whose solids are 70 % bismuth oxide and 30 % manganese dioxide by weight, and fire it in air at 800 °C for 30 minutes. Example 7 does not name the paste's liquid; ours: the epoxy-resin butyl-alcohol solution of Example 4. Not given: how much paste.

གོམ་པ་འདིའི་རྫས་རིགས:

བིས་མུཏ་ཨོག་སཱའིཌ།བིས་མུཏ་ཨོག་སཱའིཌ།1 as required
མང་ག་ནིསི་ཌའི་ཨོག་སའིཌི། (པའི་རོ་ལུ་སའིཊི)མང་ག་ནིསི་ཌའི་ཨོག་སའིཌི། (པའི་རོ་ལུ་སའིཊི)1 as required

ལག་ཆས་དགོས་མཁོ:

ཨེ་པོག་སི་ཞུན་ཤིངཨེ་པོག་སི་ཞུན་ཤིང
n-བུ་ཊ་ནོལ།n-བུ་ཊ་ནོལ།
མཱཕལ་ཐབམཱཕལ་ཐབ
6

Spray aluminium electrodes and attach leads

Spray a metallised film of aluminium on both faces. Attach a lead wire to each with conductive silver paint, as in Example 1. Unknown: the spraying method and the paint.

གོམ་པ་འདིའི་རྫས་རིགས:

ཨེལུ་མི་ནི་ཡམ་གྱི་གོང་བུ།ཨེལུ་མི་ནི་ཡམ་གྱི་གོང་བུ།1 as required
དངུལ་གྱི་གློག་འཁྱོར་ཚོནདངུལ་གྱི་གློག་འཁྱོར་ཚོན1 as required
ཟངས་ཐགཟངས་ཐག2 དུམ་བུ།

ལག་ཆས་དགོས་མཁོ:

མ་ཤེས་པའི་ལྕགས་གཏོར་ཐབས།མ་ཤེས་པའི་ལྕགས་གཏོར་ཐབས།
བར་ནི་ཡར་གྱི་འཇལ་ཆས།བར་ནི་ཡར་གྱི་འཇལ་ཆས།

རྫས་རིགས

7

ལག་ཆས་དགོས་མཁོ

11

འབྲེལ་ཡོད་བིལུ་པིརིན་ཊི

བིལུ་པིརིན་ཊི་འདི་ཚུ་ཐབས་ལམ་དང་རྫས་རིགས། སྤྱི་ཆོས་བགོ་བཤའ་བྱེད

CC0 སྤྱི་དབང

བིལུ་པིརིན་ཊི་འདི་CC0 འོག་བཀྲམས་ཡོད། ཁྱེད་རང་གིས་ཆོག་མཆན་མ་བཞེས་པར་ཕབ་ལེན་དང་བཟོ་བཅོས། བགོ་བཤའ། དགོས་མཁོ་གང་ལའང་བཀོལ་སྤྱོད་བྱས་ཆོག

བཟོ་མཁན་ལ་རྒྱབ་སྐྱོར་བྱེད་པའི་ཆེད་ཁོང་ཚོའི་བིལུ་པིརིན་ཊི་བརྒྱུད་ཐོན་སྐྱེད་ཉོ། བཟོ་མཁན་གྱིས བཟོ་མཁན་གྱི་ཁེ་ཕོགས ཚོང་པས་གཏན་འཁེལ་བྱས་པ། ཡང་ན་བིལུ་པིརིན་ཊི་འདིའི་པར་གསར་བཟོས་ཏེ་ཁྱེད་རང་གི་བིལུ་པིརིན་ཊི་ནང་མཐུད་སྦྲེལ་བྱས་ཏེ་ཡོང་སྒོ་བགོ་བཤའ་བྱེད།

གྲོས་བསྡུར

(0)

ནང་འཛུལ གྲོས་བསྡུར་ནང་མཉམ་ཞུགས་ཆེད

བསམ་ཚུལ་ཚུ་ཐོབ་བཞིན...