艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Air Hose: Couplings with Two-Bead Crimped Ferrules
A rubber hose becomes an air hose when couplings are fixed to its ends. John Keenan's fitting (US 4,453,746, 1984, for railway airbrake hoses) has a stem with a stop flange, ridges and a bulbous tip; a ferrule is crimped over it in two beads, the second ending at the bulb's widest point and flaring out so it cannot cut the hose. If a ferrule fails in the field, a band clamp over the ridged recess holds the hose without the crimping machine.
The patent gives no sizes or materials. The picture: the patent's Fig. 3.
中级
1 hour
说明
1
1
Cut the hose to length
Cut the hose to length
Ours: cut the rubber hose square to the length needed.
此步骤所需材料：
橡胶软管1 个所需工具：
美工刀2
2
Push the hose onto the coupling stem
Push the hose onto the coupling stem
Slide a ferrule over the hose. By hand, push the hose end over the coupling's stem (52), past the bulbous tip (58) and the ridges (62), until it butts against the stop flange (54).
此步骤所需材料：
软管快速接头1 个
软管扣压套1 个3
3
Crimp the ferrule in two beads
Crimp the ferrule in two beads
Crimp the ferrule into two beads. The first (68) runs from the recess behind the flange (56), over the flange, to the recess above the ridges. The second (70) ends at the bulb's widest point; the ferrule's end flares out so it cannot pierce the hose.
所需工具：
软管扣压机4
4
Fit the other end
Fit the other end
Fit the hose nipple's stem into the other end of the hose the same way: a ferrule, pushed to the flange, crimped in two beads.
此步骤所需材料：
软管螺纹接头1 个软管扣压套1 个所需工具：
软管扣压机此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。