合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)
Alundum, the artificial corundum made at Niagara Falls by the Norton Company: bauxite, calcined to drive off its water, is fused in an electric arc furnace with about 5 per cent carbon, which reduces its iron, silicon and titanium to metal nodules; the fused alumina cools slowly into a hard crystalline mass that is crushed and sized as abrasive grit.
Bauxite melts near 2,000 °C and could not be melted commercially without the electric furnace.
Source: A. Stansfield, The Electric Furnace, 2nd ed. (1914), pp. 357-358. Picture: the book's Fig. 143, the Higgins alundum furnace.
高级
Unknown
说明
1
1
Calcine the bauxite
Calcine the bauxite
Calcine the bauxite in a rotary kiln to drive off its combined water.
此步骤所需材料：
铝土矿1 个所需工具：
回转窑2
2
Fuse in the arc furnace
Fuse in the arc furnace
Strike arcs between the electrodes and the carbon lining of the furnace bottom, then feed the calcined bauxite, with about 5 per cent carbon, in round the arcs; it melts and in time carries the current between the two arcs. Lower the water-cooled shell as the fused alundum builds up; the lower part solidifies as it fills.
此步骤所需材料：
碳1 about 5 per cent所需工具：
电弧炉3
3
Cool slowly
Cool slowly
When the shell is full, lift it with its contents off the base, put another shell in place, and let the alundum cool slowly so it grows into a hard, tough crystalline mass.
所需工具：
电弧炉4
4
Crush, separate and size
Crush, separate and size
Break up and crush the mass, separate the nodules of reduced metal mechanically, and size the grains for use as an abrasive.
所需工具：
碎石机
筛组（分级筛网）此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。