艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
绿色未来
逆向工程
科学
体育
技术
可穿戴设备
Building a Cajón — The Peruvian Box Drum You Sit On
Woody

创建者

Woody

3. 七月 2026NO
0
0
0
0
0

Building a Cajón — The Peruvian Box Drum You Sit On

Build a cajón: a plywood box drum you sit on and play with your bare hands, with guitar-string snares behind the front face that buzz. Cut the box, fit the thin playing face, string the snare, and assemble. A buildable school/maker project in the plate drum and the snare — a deep bass in the middle, a crisp buzzing crack at the top.
初学者
2-3 hours

说明

1

A drum you sit on

The cajón is a wooden box you sit on and slap with your bare hands. The thin front face is the drumhead; guitar-string snares behind it buzz. Hit the middle for a deep BASS, the top edge for a crisp snappy SLAP.
2

Cut the box panels

Cut five panels of thick plywood — two sides, a top, a bottom and a back — for a box about the size to sit on (roughly 30 x 30 x 48 cm). These stiff walls stay silent; they are just the soundbox.

此步骤所需材料:

Baltic Birch Plywood (3/4 inch, 24x30)Baltic Birch Plywood (3/4 inch, 24x30)1

所需工具:

HacksawHacksaw
3

Cut the sound hole

Cut a round hole (about 10-12 cm) in the BACK panel. This port lets the boom of air out and tunes the bass, exactly like the hole in a guitar or the open foot of a djembe.

所需工具:

AwlAwl
4

Make the tapa (playing face)

Cut the front face (the tapa) from THIN plywood. This is the only part that is meant to vibrate — the box's drumhead. It will be screwed firmly at the top and bottom but left slightly loose at the top corners so the corners can slap.

此步骤所需材料:

Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1
5

Fit the snare

Stretch two or three guitar strings at an angle up the INSIDE of the tapa, touching it lightly. When the tapa is struck it rattles the strings — this buzz is the cajón's built-in snare, its signature sizzle.

此步骤所需材料:

Guitar String Set (Acoustic, Phosphor Bronze)Guitar String Set (Acoustic, Phosphor Bronze)1
6

Assemble the box

Glue and screw the five thick panels into a box, then screw the thin tapa on across the open front — tight at top and bottom, with the top corners left free to snap.

此步骤所需材料:

PVA Wood GluePVA Wood Glue1
#8 x 1" Wood Screw#8 x 1" Wood Screw24
7

Sit down and play

Sit on top of the box and play the tapa between your knees. Strike the CENTRE with a flat hand for the deep bass 'doom'; strike the TOP EDGE with your fingers for the buzzing snare 'crack'. Those two strokes are the whole groove.
8

Compendium — the plate drum with a snare

The cajón is unusual: its 'drumhead' is not a stretched skin but a thin sheet of WOOD (the tapa), so it is really a plate drum. Struck in the middle, the whole plate flexes inward and pumps a slug of air around the sealed box and out of the back port — the box acting as a Helmholtz resonator (a bottle blown at its own pitch) to boom out a deep BASS, the same job the open foot does on a djembe. Struck near the top edge, only the loosely-fixed corner of the plate snaps and springs, giving a bright dry crack with little body. Laid against the inside of that plate are the snares — a few guitar strings under light tension — and every time the plate moves it shakes the strings, which rattle against it and add a sizzling buzz on top of the note; it is a deliberate BUZZER, the very same idea as the mbira's rattling shells or the dizi's buzzing membrane, an African aesthetic that a clean tone is less alive than a buzzing one. That African root is no accident: the cajón was built by enslaved Africans in colonial Peru, said to be improvised from shipping crates when drums were forbidden, and its bass-and-slap hand technique is the box-shaped cousin of the djembe. From those crates it has grown into a staple of flamenco, folk and pop worldwide — proof that a plywood box, thought through, is a complete drum kit.

材料

5

所需工具

2

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

CC0 公共领域

此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品,无需征得许可。

通过购买蓝图中的产品支持创客,他们将获得 创客佣金 (由供应商设定),或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。

讨论

(0)

登录 加入讨论

加载评论中...