艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Hole Saws: Toothed Strip Rolled into a Cup
A hole saw is a steel cup with teeth on its rim, driven by an arbor that carries a pilot drill at the centre. One method starts from flat strip: the teeth are stamped and then ground along one edge, the strip is bent into a tube with the teeth at one end, the seam is welded and its bead ground off, the tube is heat-treated to harden the teeth, and a cap is fitted. Better saws are bi-metal: a carbon steel cup with high-speed steel teeth welded on.
高级
Factory process
说明
1
1
Stamp and grind the teeth
Stamp and grind the teeth
Cut strip to length, stamp out the teeth along one edge and grind them.
此步骤所需材料：
碳素钢带0.2 公斤所需工具：
冲床
台式砂轮机2
2
Roll and weld
Roll and weld
Bend the strip into a tube with the teeth at one end, weld the seam and grind off the bead.
所需工具：
管缝焊机台式砂轮机3
3
Harden
Harden
Heat-treat the tube to harden the teeth.
所需工具：
钢带淬火回火炉4
4
Cap and arbor
Cap and arbor
Fit the cap; the saw is driven by an arbor carrying the pilot drill.
此步骤所需材料：
带中心钻的开孔器连杆1 个此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。