艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Bucket Hook: an S-Hook Bent Hot over the Anvil Horn
A bucket hangs from a tap, a pole or a crossbeam on an S-hook: one end over the support, the other through the bail. Harcourt (1920) gives it as a first forging exercise: bend one end hot over the anvil horn, then the other end the opposite way. Rod size and hook sizes are ours.
The picture: a forged S-hook (Wikimedia Commons).
初学者
1 hour
说明
1
1
Cut and square the stock
Cut and square the stock
Saw 200 mm of 8 mm mild steel rod and square up both ends.
此步骤所需材料：
低碳钢圆棒200 mm所需工具：
钢锯
安全眼镜2
2
Bend the first hook
Bend the first hook
Heat about half the piece and bend one end over the anvil horn, with the blows falling on the far side of the horn. Close it to a hook that fits over the support.
此步骤所需材料：
木炭1 as required所需工具：
铁匠炉
铁砧
横向楔头锤
铁匠钳
电焊手套安全眼镜3
3
Bend the second hook
Bend the second hook
Heat the other end and bend it over the horn the same way, but in the opposite direction, to make the S. Size it to take the bucket's bail.
所需工具：
铁匠炉铁砧横向楔头锤铁匠钳电焊手套4
4
True it up
True it up
Even out both curves so the hook is free of rough hammer marks, and let it cool in air.
所需工具：
铁砧横向楔头锤铁匠钳此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。