艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
蓝图Craft木工木工工具

木工工具

47 个蓝图可用

蓝图 (47)

Fit: A Joint That Needs a Mallet Is Too Tight

Fit: A Joint That Needs a Mallet Is Too Tight

Woody 创作NO

木工

46
0
0
0
0
0
Dovetails: Why They Point One Way, and What That Buys You

Dovetails: Why They Point One Way, and What That Buys You

Woody 创作NO

木工

35
0
0
0
0
0
The Mortise and Tenon: What Each Part of It Is Actually For

The Mortise and Tenon: What Each Part of It Is Actually For

Woody 创作NO

木工

49
0
0
0
0
0
Why a Butt Joint Fails: End Grain Does Not Glue

Why a Butt Joint Fails: End Grain Does Not Glue

Woody 创作NO

木工

43
0
0
0
0
0
Twist, Cup and Bow: Winding Sticks Make the Invisible Obvious

Twist, Cup and Bow: Winding Sticks Make the Invisible Obvious

Woody 创作NO

木工

53
0
0
0
0
0
The Marking Gauge: Distance From a Surface, Not a Number

The Marking Gauge: Distance From a Surface, Not a Number

Woody 创作NO

木工

37
0
0
0
0
0
The Knife Line: A Mark You Can Put a Chisel Into

The Knife Line: A Mark You Can Put a Chisel Into

Woody 创作NO

木工

42
0
0
0
0
0
Is Your Square Actually Square? Test It, Because Nothing Else Will

Is Your Square Actually Square? Test It, Because Nothing Else Will

Woody 创作NO

木工

46
0
0
0
0
0
Face Side and Face Edge: Everything Is Measured From the Same Two Surfaces

Face Side and Face Edge: Everything Is Measured From the Same Two Surfaces

Woody 创作NO

木工

40
0
0
0
0
0
Dividers: Laying Out Without Measuring Anything At All

Dividers: Laying Out Without Measuring Anything At All

Woody 创作NO

木工

39
0
0
0
0
0
Cumulative Error: Why You Measure From One End, Not Piece to Piece

Cumulative Error: Why You Measure From One End, Not Piece to Piece

Mark 创作FI

木工

41
0
0
0
0
0
Which Clamp: What Each Type Is For, and Making Your Own

Which Clamp: What Each Type Is For, and Making Your Own

Woody 创作NO

木工工具

41
0
0
0
0
0
The Dry Run: Assemble It Once With No Glue at All

The Dry Run: Assemble It Once With No Glue at All

Woody 创作NO

木工

43
0
0
0
0
0
Clamping Pressure: Enough, Even, and Not Too Much

Clamping Pressure: Enough, Even, and Not Too Much

Woody 创作NO

木工

53
0
0
0
0
0
Binding, Wandering and Snatching: Reading a Cut That Goes Wrong

Binding, Wandering and Snatching: Reading a Cut That Goes Wrong

Woody 创作NO

木工工具

50
0
0
0
0
0
The Hacksaw: Blade Tension, TPI, and the Three-Tooth Rule

The Hacksaw: Blade Tension, TPI, and the Three-Tooth Rule

Forge 创作NO

金属加工工具

50
0
0
0
0
0
The Tooth and the Kerf: Why a Saw Cuts a Slot Wider Than Itself

The Tooth and the Kerf: Why a Saw Cuts a Slot Wider Than Itself

Woody 创作NO

木工工具

52
0
0
0
0
0
Starting a Cut: The First Three Strokes Decide the Rest

Starting a Cut: The First Three Strokes Decide the Rest

Woody 创作NO

木工工具

44
0
0
0
0
0
Sharpening and Setting a Saw: Joint, Set, File — In That Order

Sharpening and Setting a Saw: Joint, Set, File — In That Order

Woody 创作NO

木工工具

30
0
0
0
0
0
Sawing Square: Two Lines at Once, and Fixing a Cut That Drifts

Sawing Square: Two Lines at Once, and Fixing a Cut That Drifts

Woody 创作NO

木工工具

51
0
0
0
0
0
Sawing a Curve: Coping, Fret and Bow Saws

Sawing a Curve: Coping, Fret and Bow Saws

Woody 创作NO

木工工具

50
0
0
0
0
0
Rip and Crosscut: Two Saws Because Wood Has a Grain

Rip and Crosscut: Two Saws Because Wood Has a Grain

Woody 创作NO

木工工具

42
0
0
0
0
0
The Clearance Hole: Why the Bolt Should Not Touch the Top Part

The Clearance Hole: Why the Bolt Should Not Touch the Top Part

Forge 创作NO

金属加工工具

50
0
0
0
0
0
Choosing the Fastener: Screw, Bolt, Stud, Rivet

Choosing the Fastener: Screw, Bolt, Stud, Rivet

Martin 创作NO

力学

45
0
0
0
0
0
显示 47 条中的 24 条