艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Clear Laminating Film: Polyvinyl Butyral Plasticised with Tributyl Citrate and Extruded (Nason, Monsanto, US 2,126,028)
The clear layer inside safety glass must stay rubbery from frost to summer heat and stick to glass on its own. Nason softened polyvinyl butyral with tributyl citrate, which stays in the film far better than the usual phthalate.
Result: a clear, rubbery, non-tacky film that bonds glass under heat and pressure without glue.
Source: Nason, US 2,126,028 (Monsanto, 1938). He used Butvar resin; ours is the polyvinyl butyral we make. Not given: film thickness. Picture drawn by Youblob.
中级
1 day
说明
1
1
Weigh resin and plasticiser
Weigh resin and plasticiser
Take 100 parts of polyvinyl butyral resin and 50 parts of tributyl citrate (Nason: 50 or more parts mix freely).
此步骤所需材料：
聚乙烯醇缩丁醛树脂100 parts
柠檬酸三丁酯50 parts所需工具：
等臂天平2
2
Mix with slight warming
Mix with slight warming
Work them together with slight warming in a mixer (or dissolve both in acetone and let it evaporate) until the mass is even.
所需工具：
混合罐
电热板3
3
Extrude into sheet
Extrude into sheet
Sheet the plasticised resin, for example by extrusion under pressure. Ours: a plastic extruder with a slot die. Thickness: not given.
所需工具：
塑料挤出机
挤压模4
4
Check the film
Check the film
The film should be clear, moderately soft and rubbery, but not tacky. Pressed hot between glass sheets it bonds without adhesive.
所需工具：
电热板此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。