艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Diagonal Screw Dasher Churn: Dished Blades on a Slanting Shaft Twist the Butter Together
Jacob Boyers of Granville, Virginia, received US 13,421, dated 14 August 1855, for dished, perforated dashers set "at an angle thereto, so as to resemble a screw" on a shaft laid diagonally in the tub, so the butter is gathered "lump joining lump as it is twisted by the screw."
This rung prints the dashers, step and top slot, fits them in a tub and makes butter.
中级
About 3 hours, plus printing
说明
1
1
The diagonal shaft
The diagonal shaft
正在加载 Jupyter 笔记本…
2
2
A screw in the churn before it
A screw in the churn before it
An upright screw keeps the cream moving; Boyers lays his screw diagonally.
3
3
Read US 13,421
Read US 13,421
"The placing the shaft diagonally in the tub, is not from mere caprice; its position enables me to create a vortex, or whirlpool; the lower end of the shaft, viz., at A; while on the opposite side of the tub, viz., at B, the butter is comparatively quiet and suffered to gather in lumps."
4
4
Print the parts
Print the parts
Print three dashers (/uploads/blueprints/diagonal-screw-dasher-churn-dasher.stl), with supports under the dished blades, the corner step (/uploads/blueprints/diagonal-screw-dasher-churn-corner-step.stl) and the top slot (/uploads/blueprints/diagonal-screw-dasher-churn-top-slot.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
此步骤所需材料：
PETG线材1 个所需工具：
FDM 3D 打印机5
5
Tub and shaft
Tub and shaft
Use a rectangular food-grade container about 260 by 180 mm and 220 mm deep. Seal the step into one bottom corner with food-safe silicone and clip the top slot on the opposite rim. Slide the dashers onto a 10 mm square hardwood shaft, each turned 60° from the last, and lay it from the step into the slot. Glue a crank arm and handle on its top end.
此步骤所需材料：
食品级贮存容器1 个
硅酮密封胶1 个
硬木销钉1 个
松木板1 个
木工胶1 个所需工具：
手锯
充电式电钻
钻头套装6
6
The build in 3D
The build in 3D
FreeCAD model of this build: the tub cut away to show the diagonal shaft from the corner step to the top slot, with three pairs of dished, perforated blades set like a screw.
7
7
Churn
Churn
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Turn the crank steadily and watch the butter gather on the quiet side; time until it comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
此步骤所需材料：
鲜奶油2000 毫升
粗海盐1 个
水1 个所需工具：
留置式探针温度计
秒表
数字厨房秤
大号不锈钢搅拌盆8
8
Troubleshooting
Troubleshooting
Diagonal screw dasher troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
**Jacob Boyers** of Granville, Virginia (the specification writes "Monongahela" County), US 13,421, 14 August 1855. He claimed the shaft combined with the dashers as arranged. A container and printed parts stand in for his tub. FDM prints hold food in their layer lines, so wash well and replace when worn.
材料
9- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 2000 毫升占位符
- 1 个占位符
- 1 个占位符
所需工具
8- 占位符
- 占位符
- 1 vendor sell this, none ship to you yet占位符
- 占位符
- 占位符
- 占位符
- 占位符
- 占位符
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。