艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Hacksaw: Bent and Flattened Frame, Bi-Metal Blade
A hacksaw is a C-shaped frame holding a narrow blade under tension from a screw. In a 1936 patented frame, each upright is made from a piece of wire rod, bent to shape and then pressed, rolled or hammered flat, with its end flattened at right angles to carry the blade, and the uprights are held in a channel-section top member. Bi-metal blades, patented in 1976, start as a metal block with a central strip of cutting tool steel; it is rolled flat into a sheet, the sheet is divided into two blades whose edges are the tool steel, the teeth are cut in that edge, and the blades are hardened by heating, quenching and tempering. The teeth are given a wavy set.
高级
Factory process
说明
1
1
Bend and flatten the uprights
Bend and flatten the uprights
Bend a piece of wire rod to the upright's shape, then press, roll or hammer its horizontal part and most of its upright part flat; flatten the end at right angles to take the blade.
此步骤所需材料：
钢盘条卷1 as required所需工具：
带锻模的落锤2
2
Assemble the frame
Assemble the frame
Fit the uprights into the channel-section top member and fit the tensioning screw.
此步骤所需材料：
槽形钢带1 个
蝶形螺母张紧螺杆1 个3
3
Make the blade stock
Make the blade stock
Roll a block with a central strip of tool steel flat into a sheet, and divide it into two blades with the tool steel along one edge.
此步骤所需材料：
高速钢圆钢1 as required
碳素钢带1 as required所需工具：
轧机4
4
Cut and harden the teeth
Cut and harden the teeth
Cut the teeth in the tool-steel edge, set them in a wave, and harden the blades by heating, quenching and tempering.
所需工具：
锯齿切削机
钢带淬火回火炉
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。