艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Copper Coins Hammered Between a Pile and a Trussel
Until machines took over in the 1600s, coins were hammered: a blank laid on the lower die, the pile, sunk in a log, and the upper die, the trussel, held on top and struck with a hammer, stamping both faces at once. Cut round blanks from copper sheet and strike them the same way.
The picture: a carved moneyer with hammer and trussel, the pile beside him.
中级
A day
说明
1
1
Set the pile
Set the pile
Cut a socket in the end of a sturdy log and drive the pile die into it, face up, so it sits firm.
所需工具：
硬木原木（栎、槭、山毛榉）
木工凿子套装
横向楔头锤
Coin Dies (Pile and Trussel)2
2
Cut the blanks
Cut the blanks
Scribe circles on the copper sheet with dividers, cut them out with snips and file the edges round. Weigh them so each coin is the same.
此步骤所需材料：
铜板1 个所需工具：
两脚规
铁皮剪
金属锉
等臂天平3
3
Soften them
Soften them
Heat the blanks to a dull red on the hearth and quench them in water, so the copper takes the design (ours).
所需工具：
炉膛（锻火）
铁匠钳
淬火水桶
水
皮革工作手套4
4
Strike
Strike
Lay a blank on the pile, set the trussel squarely on it, and strike the trussel one hard blow with the hammer. Both faces are stamped at once.
所需工具：
Coin Dies (Pile and Trussel)横向楔头锤
安全眼镜5
5
Blanks from your sheet
Blanks from your sheet
正在加载 Jupyter 笔记本…
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。