艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Plain-Weave Cotton Cloth on a Rigid Heddle Loom
Plain weave is the simplest cloth: each crosswise thread goes over one lengthwise thread and under the next, and back the other way on the next pass. A rigid heddle loom does the lifting: one bar of slots and holes raises or lowers every other warp thread at once.
The thread is the 2-ply cotton from the hand-spinning blueprint, used for both warp and weft.
中级
About a week of evenings
说明
1
1
The thread
The thread
Spinning and plying the cotton thread used here.
2
2
Find the sett
Find the sett
Wrap the thread round a ruler, touching but not crowded, and count the wraps in 2.5 cm. For plain weave set the warp at about half that many threads per 2.5 cm, and choose the heddle to match.
所需工具：
直尺3
3
Measure the warp
Measure the warp
On the warping board wind as many threads as the width times the sett, each the cloth's length plus about 50 cm for tying on and loom waste.
此步骤所需材料：
棉线150 克所需工具：
整经板
卷尺4
4
Thread the heddle
Thread the heddle
Thread one warp end through each slot and each hole in turn, tie the ends to the back beam, wind on under even tension and tie on at the front.
所需工具：
硬综织机5
5
Weave
Weave
Raise the heddle, pass the shuttle through, beat the weft gently with the heddle; lower the heddle, pass back, beat. Leave the weft at a slant across the shed so the edges do not pull in.
此步骤所需材料：
棉线120 克所需工具：
硬综织机
梭子6
6
Cut off and secure
Cut off and secure
Cut the cloth off the loom and knot or hem both ends so the weft cannot slip off.
所需工具：
裁布剪7
7
Wash to finish
Wash to finish
Wash the cloth in hot water, dry it, and measure it: the threads relax and close up. Note how much it shrank for the next warp.
所需工具：
卷尺8
8
Troubleshooting
Troubleshooting
Plain weave troubleshooting.
Flow
Loading...
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。