艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Horseshoe Nails Forged and Headed from Iron Rod
Horseshoe nails hold the shoe through the hard outer wall of the hoof. They are shaped to bend outward as they are driven, so the point comes out through the wall, where it is cut off and clinched over. A shoe complete with its nails was found in a fifth-century grave. Draw a flat tapering shank, bevel the point on one side, and head it.
The picture: horseshoe nails in three sizes.
中级
Half a day
说明
1
1
Draw the shank
Draw the shank
Heat the end of the rod and draw a flat, tapering shank about 45 mm long, thinner toward the point.
此步骤所需材料：
熟铁圆棒2 m所需工具：
铁匠炉
铁砧
横向楔头锤
铁匠钳
电焊手套
安全眼镜2
2
Bevel the point
Bevel the point
Forge a short bevel on one face of the point only. Mark that face: it goes toward the inside of the hoof, so the nail turns outward.
所需工具：
铁砧横向楔头锤铁匠钳电焊手套安全眼镜3
3
Cut and head
Cut and head
Nick the rod on the hardy a little above the shank, drop the shank into the header, snap it off and hammer the stub into a tapered, wedge-shaped head that will sit in the nail hole of the shoe.
所需工具：
铁匠炉
铁砧剁刀
钉头模板横向楔头锤铁匠钳电焊手套安全眼镜4
4
Finish
Finish
Let them cool in air so the iron stays soft enough to clinch. File off any burr and check each one is straight.
所需工具：
金属锉5
5
Nails for a set
Nails for a set
正在加载 Jupyter 笔记本…
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。