合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Industrial Air Compressor: a Converted Motorcycle Engine, Motor-Driven (Shop Notes, 1919)
A workshop compressor driven by a 1 hp electric motor: an old single-cylinder motorcycle engine rebored and run as a pump, its exhaust port blanked, its own automatic inlet valve taking in air, and a ball check valve in the spark-plug hole sending air to a tank.
Source: Popular Mechanics Shop Notes for 1919, pp. 3166-3167. Unknown: tank, belt and sizes. Picture: the article's drawing.
中级
Unknown
说明
1
1
Recondition the cylinder
Recondition the cylinder
Rebore the old engine and fit a new piston for good compression. Remove the exhaust valve and bolt a steel plate, with a gasket under it, over the exhaust port. Leave the automatic inlet valve as it is: it now draws in air.
此步骤所需材料：
未知材料1 old motorcycle engine
活塞连杆总成1 new piston
低碳钢板1 blanking plate
密封垫1 个
六角头螺栓 - 8.8 级1 个所需工具：
镗杆
金属车床
手摇钻
活动扳手2
2
Fit the outlet
Fit the outlet
In place of the priming cock on top of the cylinder (the drawing shows it screwed into the spark-plug hole) fit a ball-valve hose connection, and run its hose to the air tank.
此步骤所需材料：
球形止回阀1 个
压缩空气软管1 个未知材料1 air tank所需工具：
活动扳手3
3
Fit the drive and mount it
Fit the drive and mount it
Fit a longer main shaft and key an ordinary shaft pulley on its end. Leave the old flywheel in place for momentum. Bolt steel lugs to the floor and fasten the engine base to them. Belt it to a 1 hp, 110 volt motor, and put oil in the crankcase for splash lubrication.
此步骤所需材料：
低碳钢圆棒1 longer main shaft
滑轮1 个低碳钢板1 floor lugs六角头螺栓 - 8.8 级1 个
电动机1 1 hp, 110 V
机油1 个所需工具：
金属车床活动扳手材料
11- 1 air tank占位符
- 1 new piston占位符
- 1 floor lugs占位符
- 1 个占位符
- 占位符
- 1 个占位符
- 1 个占位符
- 1 longer main shaft占位符
- 1 个占位符
- 1 1 hp, 110 V占位符
- 1 个占位符
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。