艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Lead Sheet Cast on a Tilted Iron Plate, Ure 1839
Thin lead sheet can be cast without rolling. Andrew Ure (1839) describes the white-lead works: melted lead is poured on an iron plate over the pot, and as soon as its surface begins to set the plate is tipped, so the still-liquid lead runs back and leaves a thin sheet that lifts off like paper. Their sheets were 1/24 inch thick or less.
The picture: our diagram, the plate tipped over the pot as the liquid runs off.
中级
An afternoon
说明
1
1
Melt the lead
Melt the lead
Melt lead in a cast-iron pot over the fire. Work outdoors, keep food and drink away, and wash your hands after.
此步骤所需材料：
铅锭5 公斤
木炭3 as required所需工具：
铸铁熔锅
铁匠炉
防尘口罩
电焊手套
安全眼镜2
2
Set the plate
Set the plate
Lay a clean, dry iron plate across the pot so it can be tipped toward one side to drain into the pot.
所需工具：
铁板（锻打）铸铁熔锅电焊手套安全眼镜3
3
Pour and tip
Pour and tip
Ladle lead onto the plate. The moment its surface starts to set, tip the plate so the liquid runs back into the pot; the thin set layer stays as a sheet.
所需工具：
铸造浇包铁板（锻打）电焊手套安全眼镜4
4
Lift and repeat
Lift and repeat
Lift the sheet off, cool the plate with water, and pour again. Trim the sheets with snips.
此步骤所需材料：
水5 升所需工具：
铁皮剪电焊手套安全眼镜5
5
Sheet from a pot
Sheet from a pot
正在加载 Jupyter 笔记本…
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。