艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Petroleum Coke: Crude Oil Residue Coked in a Delayed Coker and Calcined
Petroleum coke is the solid carbon left from the heaviest part of crude oil. A refinery distils crude oil, then distils the residue again under vacuum, heats what is still left to about 480–505 °C and lets it crack in a coke drum. The drum fills with green coke in 12 to 24 hours; it is cut out with a water jet and calcined in a rotary kiln. Calcined coke feeds synthetic graphite and carbon anodes.
The picture: our diagram of the route from crude oil to calcined coke.
高级
A day per coke drum
说明
1
1
Distil the crude oil
Distil the crude oil
Distil crude oil in an atmospheric column, slightly above atmospheric pressure. Draw off the lighter cuts, among them naphtha (boiling between about 30 and 200 °C), and keep the residue from the bottom, which boils above 370–380 °C.
此步骤所需材料：
原油1 t所需工具：
常压蒸馏塔2
2
Distil the residue under vacuum
Distil the residue under vacuum
Distil that residue again at 10–40 mmHg absolute so it stays below 370–380 °C. The heavy bottoms left are the vacuum residue.
所需工具：
减压蒸馏塔
真空泵3
3
Heat and fill the coke drum
Heat and fill the coke drum
Pump the vacuum residue through the coker furnace to about 480–505 °C, with steam in the tubes, into a coke drum. It cracks there: gas oil and lighter parts leave as vapour and coke builds up in the drum, which fills in 12 to 24 hours.
所需工具：
延迟焦化装置
水4
4
Quench and cut out
Quench and cut out
Switch the feed to the second drum. Steam out the full drum, fill it with water, wait several hours and drain it. Cut the coke out with a high-pressure water jet. This is green coke.
所需工具：
延迟焦化装置水5
5
Calcine
Calcine
Calcine the green coke in a rotary kiln at about 1300 °C to drive off the remaining volatile hydrocarbons.
所需工具：
回转窑6
6
Coke from a tonne of residue
Coke from a tonne of residue
正在加载 Jupyter 笔记本…
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。