艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
PLA Pellets: Purified Lactide Polymerised with a Trace of Litharge
PLA (polylactide) is the polymer of lactic acid, the stock for PLA filament. Schneider's du Pont patent (US 2,703,316, 1955) made a tough, clear polymer by heating very pure lactide with a trace of litharge in a closed, evacuated vessel: at 180 °C it was done in 6½ hours. Above 200 °C the polymer falls back to lactide. Extruding it and cutting the strand into pellets is our step.
The picture: our diagram.
高级
About 8 hours
说明
1
1
Charge lactide and litharge
Charge lactide and litharge
Weigh 10 parts of purified lactide (melting at 125 °C in the patent's example; it must melt at 120 °C or above) and 0.004 part litharge into the reaction vessel.
此步骤所需材料：
丙交酯10 parts所需工具：
氧化铅（密陀僧）
等臂天平
压力反应器
P100 防毒面具2
2
Evacuate and close
Evacuate and close
Pump the air out of the vessel and close it.
所需工具：
真空泵
真空表压力反应器3
3
Heat 6½ hours at 180 °C
Heat 6½ hours at 180 °C
Heat at 180 °C for 6½ hours. Do not go above 200 °C, where the polymer turns back to lactide. The product is a clear, colourless polymer (the example's softened at about 82 °C).
所需工具：
干燥炉
实验室温度计压力反应器4
4
Extrude and pelletise
Extrude and pelletise
Ours: take the polymer out, melt it through an extruder and cut the cooled strand into pellets.
所需工具：
塑料挤出机
造粒机
耐热手套
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。