合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Platform Scale: Four Knife-Edge Hinges and Two Levers to a Steelyard (Fairbanks, 1831)
A scale for wagons and carts, reading the same wherever the load stands. Erastus and Thaddeus Fairbanks of St. Johnsbury, Vermont, patented it in 1831. A plank platform nine by twelve feet rests on four knife-edge hinges, one at each corner, and two levers gather the load from all four onto one rod. The rod pulls on an ordinary steelyard, which then reads only a tenth or a twentieth of the load.
Result: a platform scale reading ten times (or twenty times) what the steelyard shows, the same wherever the load stands on the platform.
Source: E. & T. Fairbanks, US Patent No. 118 (1837), restating their patent of 13 June 1831. Unknown: the material and sizes of the hinges, knife-edges, fulcra and levers. Picture: patent drawing.
高级
1 week
说明
1
1
Build the frame
Build the frame
Lay two timber bed-sills, about 10 inches square and 16 feet long, parallel and about 7 feet apart. Bolt two end timbers, 8 by 14 inches and 12 feet long, across them near their ends. Just inside the end timbers, lay the two rockers, 8 inches square and 9 feet long, with their tops flush with the end timbers. Ours: carriage bolts.
此步骤所需材料：
方材6 2 sills, 2 end timbers, 2 rockers
马车螺栓1 套所需工具：
双人横割锯
螺旋钻
锤子2
2
Fit the four knife-edge hinges
Fit the four knife-edge hinges
Bolt a hinge firmly under each end of each rocker, one at every corner of the machine. Each hinge carries two knife-edges. One rests on a fulcrum standing on the bed-sill; the other reaches out to carry the platform. Set every knife-edge parallel to the others: knife-edges at an angle cramp and bind. Not given: the material and size of the hinges, knife-edges and fulcra.
此步骤所需材料：
未知材料1 4 hinges, 8 knife-edges, 4 fulcra马车螺栓1 套所需工具：
螺旋钻
未知尺寸3
3
Join the levers
Join the levers
Run a horizontal lever from each rocker. The longer lever reaches across nearly to the opposite rocker. The shorter one ends at a point equally far from the axes of both, and hangs there from the longer lever by a chain, rod or stirrup, so the two act as one. From the end of the longer lever a rod rises straight up to a steelyard hung from a fixed support. With the two knife-edges of each hinge 6 inches apart and the rod hung 60 inches from the lever's axis, the load is ten times the steelyard reading; at 120 inches it is twenty times. Not given: the lever material. Ours: an iron chain and a wrought iron rod.
此步骤所需材料：
未知材料1 2 levers
铁链1 lever link
熟铁圆棒1 rod to the steelyard
杆秤1 个所需工具：
未知尺寸4
4
Lay the platform
Lay the platform
Lay two timbers, short enough to pass freely between the rockers, parallel over the bed-sills. Spike stout planks 9 feet long across them, making a platform of about 9 by 12 feet. Under these timbers fasten iron plates that rest on the inner knife-edges of the hinges. Ours: nails as the spikes.
此步骤所需材料：
方材2 platform timbers
木板材1 for 9 x 12 ft
铁板4 个
钉子1 as needed所需工具：
双人横割锯锤子材料
9- 2 platform timbers占位符
- 2 套占位符
- 1 2 levers占位符
- 1 lever link占位符
- 1 rod to the steelyard占位符
- 1 个占位符
- 1 for 9 x 12 ft占位符
- 4 个占位符
- 1 as needed占位符
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。