艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
绿色未来
逆向工程
科学
体育
技术
可穿戴设备
Making Panpipes — A Row of Tuned Bamboo Tubes
Woody

创建者

Woody

3. 七月 2026NO
1
0
0
0
0

Making Panpipes — A Row of Tuned Bamboo Tubes

Build the syrinx: a row of closed bamboo tubes cut to graduated lengths, each sounding one note, bound side by side and blown across the top. Cut, tune and play a scale, then learn why a longer tube always sounds a lower note. A simple, buildable school project in the physics of closed pipes.
初学者
30 minutes

说明

1

A row of tubes, each a note

Panpipes are one of the oldest melody instruments: a row of closed tubes, each cut to a length that sounds a single note when you blow across its top.
2

Choose your bamboo

Pick straight bamboo about a finger-width thick. You want lengths that each keep a solid node (the natural wall inside) to seal one end.

此步骤所需材料:

BambooBamboo1
3

Cut the longest tube

Saw a tube about 18 cm long, cutting just below a node so the bottom is sealed. This will be your lowest note.

所需工具:

Bamboo Saw (Take-nokogiri)Bamboo Saw (Take-nokogiri)
4

Cut the rest, each shorter

Cut five or six more tubes, each about 2 cm shorter than the last, always keeping a sealed node at the bottom. Shorter tubes give higher notes.

所需工具:

Bamboo Saw (Take-nokogiri)Bamboo Saw (Take-nokogiri)
5

Smooth the top rims

Rub the open top edge of each tube smooth and level, so your breath splits cleanly across it.
6

Line them up

Stand the tubes side by side in order, longest to shortest, with all the open tops level in a straight line.
7

Bind the tubes together

Lash the tubes together with twine, wrapping firmly near the top and again near the bottom so the row sits flat and rigid.

此步骤所需材料:

Abaca Tying TwineAbaca Tying Twine1
8

Make your first note

Rest the top edge of the longest tube on your lower lip and blow ACROSS it, not into it — like blowing over a bottle. A clear note appears.
9

Play a scale

Slide along the row, blowing across each tube in turn. The notes rise as the tubes get shorter — that is your scale.
10

Measure length against pitch

Measure each tube with a ruler and note its pitch on a free tuner app. Longer tube, lower note — plot the pairs and see the pattern.
11

Tune a tube that is too low

Drop a small pellet of beeswax into the bottom of the tube. Shortening the air column raises its pitch — add wax a little at a time until it matches.

此步骤所需材料:

BeeswaxBeeswax1
12

Fix a tube that is too high

You cannot make a tube longer, so cut a fresh, slightly longer tube instead. A longer air column always gives a lower note.
13

Compendium — the physics of a stopped pipe

Blowing across the top sets the air INSIDE the tube vibrating as a standing wave. Because the bottom is closed and the top is open, the tube is a 'stopped pipe': the longest wave that fits is about four times the tube's length, so the note's frequency is roughly f = v / (4L), where v is the speed of sound (about 343 m/s in air) and L is the tube length. That is why halving a tube's length raises its note by one octave, and why beeswax in the bottom (which shortens the air column) raises the pitch. Stopped pipes sound an octave lower than an open pipe of the same length and produce only the odd harmonics, giving panpipes their soft, hollow tone. Chain many tuned pipes together and add a wind supply and you have the pipe organ; the same idea lives on in the ancient Greek syrinx, the Andean siku and zampoña, and the Chinese paixiao.

材料

3

所需工具

1

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

CC0 公共领域

此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品,无需征得许可。

通过购买蓝图中的产品支持创客,他们将获得 创客佣金 (由供应商设定),或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。

讨论

(0)

登录 加入讨论

加载评论中...