艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Rubber and Silicone Forming: Tubing, Sheet, O-Rings and Bands
Rubber is shaped soft and then cured, the curing locking its shape and giving it its spring. Natural rubber is mixed on a two-roll mill with sulfur and activators such as zinc oxide; silicone rubber comes as a ready compound. Tubing is extruded through a ring die and cured with heat; rubber bands are extruded tube cured on mandrels and sliced across. Sheet is calendered between rolls and cured. O-rings and gaskets are compression moulded: a measured charge is laid in a heated mould cavity, the press closes, the heat cures it, and the thin flash is trimmed off.
高级
Minutes per moulding (industrial)
说明
1
1
Why rubber is cured
Why rubber is cured
What sulfur does to natural rubber.
2
2
Compound
Compound
Natural rubber is worked on a two-roll mill and the sulfur and zinc oxide are mixed in evenly.
此步骤所需材料：
烟胶片50 公斤
硫磺粉1 公斤
氧化锌粉2 公斤所需工具：
双辊开炼机3
3
Extrude tubing
Extrude tubing
Compound or silicone is extruded through a ring die as tube and cured with heat; for rubber bands, the tube is cured on mandrels and sliced across into bands.
此步骤所需材料：
硅橡胶混炼胶20 公斤所需工具：
塑料挤出机
挤压模
退火炉4
4
Calender sheet
Calender sheet
Compound is pressed into an even sheet between rolls and cured.
所需工具：
双辊开炼机退火炉5
5
Compression mould O-rings
Compression mould O-rings
A measured charge goes into each cavity of a heated O-ring mould; the press closes and holds until the rubber cures; the mould opens and the flash is trimmed.
所需工具：
加热模压机
模压模具6
6
Check
Check
Inside diameter, cross-section and wall thickness are measured.
所需工具：
6 英寸数显卡尺此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。