艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Saw Handle Rivets with Countersunk Heads
A hand saw blade is fixed in its wooden handle by rivets through both. Hodgson (1883) preferred plain beech handles with the rivets flush or countersunk: lighter, easier to handle, and no heads standing out to dull other saws in the chest. Head short steel rivets with a cone-shaped head in a nail header.
The picture: our diagram, a countersunk rivet and two set through handle and blade.
中级
An hour or two
说明
1
1
Countersink the header
Countersink the header
Use a nail header with a hole the size of the rivet shank, its top edge filed out into a cone (90°, our angle).
所需工具：
钉头模板
金属锉2
2
Nick the rod
Nick the rod
Heat a mild steel rod of the shank size, and nick it nearly through on the hardy at the shank length plus the head allowance (step 5).
此步骤所需材料：
低碳钢圆棒0.5 m
木炭1 as required所需工具：
铁匠炉
铁砧
铁砧剁刀
铁匠钳
电焊手套
安全眼镜3
3
Head it
Head it
Drop the hot end into the header and hammer the standing stock down into the cone until it fills it. Snap it off at the nick and file any metal spread past the cone off flat.
所需工具：
钉头模板铁砧
横向楔头锤铁匠钳电焊手套安全眼镜4
4
Clean up
Clean up
Let them cool without hardening; the tail is peened into a countersink on the far side of the handle. File off burrs so each shank slips into its hole.
所需工具：
金属锉5
5
Rod for a countersunk head
Rod for a countersunk head
正在加载 Jupyter 笔记本…
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。